Table of Contents
Advertisement
8 – Other settings and information display
Adjusting R/L analog reference levels
You can adjust the analog output reference level separately for
the left and right channels.
1.
Press the MENU button to open the
2.
Open the SYSTEM menu
3.
Select
or
ANALOG REF ADJ L
4.
Press the DATA dial to move the cursor right to select the
setting.
Turn the DATA dial to adjust the analog reference level.
5.
•
Setting range: ±6.0 dB (default value:
increments)
6.
After completing the setting, press the HOME button to
return to the Home Screen.
NOTE
The analog reference level settings are retained even when the
power is turned OFF.
42
TASCAM CD-9010CF
screen.
MENU
.
ANALOG REF ADJ R
, 0.1dB
0dB
Setting the online function
You can set whether or not to use the online function.
1.
Press the MENU button to open the
2.
Open the
menu.
SYSTEM
3.
Select
.
ONLINE FUNCTION
3.
Press the DATA dial to move the cursor right to select the
setting.
Turn the DATA dial to set the online function.
4.
•
(default value): Online playback mode can be
SWTCH.OK
controlled through the parallel remote connector, the
serial remote connector, and by a TASCAM RC-9010/
RC-9010S remote controller (sold separately). When
this unit is used alone, online playback mode is ON by
default.
•
: Online playback mode is always ON and
AlwaysON
cannot be switched.
6.
After completing the setting, press the HOME button to
return to the Home Screen.
NOTE
The online function setting is retained even when the power is
turned OFF.
screen.
MENU
Advertisement
Table of Contents
