Tascam CD-200BT Owner's Manual

Tascam CD-200BT Owner's Manual

Cd player / bluetooth receiver
Table of Contents

Advertisement

D01194420A
CD-200BT
CD Player / Bluetooth Receiver
OWNER'S MANUAL

Advertisement

Table of Contents
loading

Summary of Contents for Tascam CD-200BT

  • Page 1 D01194420A CD-200BT CD Player / Bluetooth Receiver OWNER'S MANUAL...
  • Page 2: Important Safety Precautions

    RF exposure compliance. Note (Conditions of conformity) Model number This equipment should be installed and operated with minimum distance 20cm between the radiator & your Serial number body. TASCAM CD-200BT...
  • Page 3: Important Safety Instructions

    TASCAM CD-200BT...
  • Page 4: Safety Information

    If the battery fluid leaks, wipe away any fluid on the battery compartment before inserting new batteries. • Do not disassemble a battery. The acid inside the battery could harm skin or clothing. TASCAM CD-200BT...
  • Page 5 For more detailed information about disposal of waste batteries and/or accumulators, please contact your city office, waste disposal service or the shop where you purchased them. For China “仅适用于海拔 2000m 以下地区安全使用” “仅适用于非熱帯气候条件下安全使用” 产品有毒有害物质或元素的名称及含量 机种 : CD-200BT 有毒有害物质或元素 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚...
  • Page 6: Table Of Contents

    Top panel ................10 Warning messages ............27 Rear panel ................11 Error messages ..............27 Display ...................12 7 – Troubleshooting ............28 Remote control unit (TASCAM RC-CD200BT) ..12 8 – Specifications 3 – Preparations ..............29 ..............14 Ratings ..................29 Making connections ............14 Input and output ratings ..........29 Connecting a device to the AUX IN jack ....15...
  • Page 7: Introduction

    1 – Introduction Thank you for your purchase of the TASCAM CD-200BT CD Player Included items / Bluetooth Receiver. Before connecting and using the unit, please take time to read This product includes the following items. this manual thoroughly to ensure you understand how to Take care when opening the package not to damage the items.
  • Page 8: Trademarks

    Once every five years, please contact the retailer where you purchased the unit or a TASCAM service center for internal cleaning. If the unit is not cleaned for a long time and dust is This product is designed to help you record and reproduce allowed to accumulate inside it, fire or malfunction could result.
  • Page 9: About Discs

    Bluetooth transmission. If this occurs, stop using In addition to audio CDs (CD-DA), the CD-200BT can play CD-R that equipment or move this unit and the Bluetooth device at and CD-RW discs on which audio CD, MP3, MP2 or WAV format least 10 m away from it.
  • Page 10: Names And Functions Of Parts

    Failure to do so could result in sudden loud noises that could, for example, harm your hearing. DEVICE SEL/PAIRING button Press this button briefly to show the name of the device connected (or ready to be connected) by Bluetooth for two TASCAM CD-200BT...
  • Page 11: Rear Panel

    • Digital output is possible when the pitch control function is format. on with CD, but the sampling frequency is changed by an DIGITAL OUTPUTS (OPTICAL) jack amount proportional to the pitch control value. This jack outputs the CD playback signal in S/PDIF digital format. TASCAM CD-200BT...
  • Page 12: Display

    2 – Names and functions of parts Display Remote control unit (TASCAM RC-CD200BT) icon Shows the status of connection with a Bluetooth device. Indicator Meaning Blinking Unconnected Connected Blinking rapidly Currently pairing Playback mode indicator This shows the current playback mode.
  • Page 13 The name of the device connected (or ready to be connected) by Bluetooth is shown for two seconds. Press this button again during this time to change the device to be connected by Bluetooth. (See “Searching for Bluetooth devices” on page 25.) TASCAM CD-200BT...
  • Page 14: Preparations

    3 – Preparations Making connections Examples of connections that can be made with a CD-200BT are shown below. Precautions before making connections • Before connecting other devices, read their operation manuals carefully and connect them properly. • Turn the power OFF or set the power to standby for this unit and all units to be connected to it.
  • Page 15: Connecting A Device To The Aux In Jack

    Operation distance otherwise be damaged. Please read and abide by the precau- Directly in front: Within 7 meters tions on them when using batteries. Also see “CAUTIONS ABOUT 15° left or right: Within 7 meters BATTERIES” on page 4. TASCAM CD-200BT...
  • Page 16: Loading A Cd

    CD will stop if playing back or paused. When the current source is changed from Bluetooth to AUX IN, playback of the connected Bluetooth device will stop. • Even if the current source is changed, the CD playback mode, current folder and program contents will not be erased. TASCAM CD-200BT...
  • Page 17: Cd Playback

    ".wav" file extension. • Data CDs with more than 999 files or 512 folders might not play correctly. • Depending on disc conditions, this unit might not be able to play some discs, or skips in the sound might occur. TASCAM CD-200BT...
  • Page 18: Playback Area

    [SOURCE SEL] button on the main unit or the PLAY MODE button on the remote control, the selected mode is shown on the main display area as follows. Continuous playback mode set: CONTINUE Single playback mode set: SINGLE Random playback mode set: RANDOM Programmed playback mode set: PROGRAM TASCAM CD-200BT...
  • Page 19: Playback

    • When the playback area is set to , use the ALL PLAY FOLDER g/t buttons on the main unit or the remote control to skip between folders. • When in program or random mode, you cannot use the number (0–9) buttons to select tracks. TASCAM CD-200BT...
  • Page 20: Search Forward And Backward

    • During folder playback, random playback will play back all tracks inside the current folder randomly. The unit enters program setting mode. If no program has been set, it will be possible to choose a track for program step 01 ( indicator blinks). PROG Audio CD example TASCAM CD-200BT...
  • Page 21: Checking The Program

    PROGRAM EDIT button when the empty program 4. Press the PROGRAM EDIT button again to exit program step is shown. setting mode. The unit exits program setting mode. NOTE • The same track can be added to the program multiple times. TASCAM CD-200BT...
  • Page 22: Adding More Program Tracks

    • If repeat playback is turned ON when stopped, repeat playback begins when the PLAY/PAUSE button is pushed. • The repeat playback function’s ON/OFF state is retained even when the power is turned OFF. TASCAM CD-200BT...
  • Page 23: Time And Text Information Display

    When stopped, you can still change the display mode from the track elapsed time to the album title. When stopped, you can switch to the album title (current folder). TASCAM CD-200BT...
  • Page 24: Pitch Control

    When the pitch control function is on, some devices might not be able to receive this unit’s digital output. • The pitch control function cannot be used with Bluetooth. TASCAM CD-200BT...
  • Page 25: Bluetooth Device Playback

    2. Prepare the Bluetooth device for Bluetooth transmission. After doing this, you will be able to control the Bluetooth device 3. Select this unit (CD-200BT) from the Bluetooth device. from this unit or the included RC-CD200BT wireless remote When pairing succeeds,...
  • Page 26: Bluetooth Information Display

    • If pairing has not been conducted (or pairing information has been deleted), will appear in place of the NO PAIR connected device name and the connected A2DP codec. TASCAM CD-200BT...
  • Page 27: Message Lists

    Error messages If one of the following error messages is shown, please refer to the Response column and try to resolve it. If you are still unable to correct the problem, please contact the nearest retailer or TASCAM representative. Message...
  • Page 28: Troubleshooting

    Try turning this unit off and than on again. Remote control doesn’t work. e Delete the “CD-200BT” pairing from the Bluetooth device e Check to see if the batteries are properly installed in the and then follow the procedures in “Pairing” to pair with it remote control.
  • Page 29: Specifications

    20 Hz - 20 kHz ±1.0 dB (during playback, JEITA) Signal-to-Noise Ratio (S/N) More than 90 dB (during playback, JEITA) Total Harmonic Distortion Less than 0.01% (during playback, JEITA) Dynamic Range More than 90 dB (during playback, JEITA) Channel Separation More than 90 dB (during playback, JEITA) TASCAM CD-200BT...
  • Page 30: General

    481 x 94.5 x 298 (mm) / 18.94 x 3.72 x 11.73 (in) Dimensions • Illustrations and other depictions may differ in part from the actual product. • Specifications and external appearance may be changed without notification to improve the product. TASCAM CD-200BT...
  • Page 31 Note TASCAM CD-200BT...
  • Page 32 CD-200BT TEAC CORPORATION http://tascam.jp/ Phone: +81-42-356-9143 1-47 Ochiai, Tama-shi, Tokyo 206-8530 Japan TEAC AMERICA, INC. http://tascam.com/ Phone: +1-323-726-0303 7733 Telegraph Road, Montebello, California 90640 USA TEAC MEXICO, S.A. de C.V. http://teacmexico.net/ Phone: +52-55-5010-6000 Río Churubusco 364, Colonia Del Carmen, Delegación Coyoacán, CP 04100, México DF, México TEAC UK LIMITED http://tascam.eu/...

Table of Contents