Download Print this page

Tascam CD-01 U Owner's Manual

Tascam owner's manual cd player cd-01 u , cd-01upro.
Hide thumbs

Advertisement

D00864010A
"
CD-01 U /CD-01UPro
CD PLAYER
OWNER'S MANUAL
˛

Advertisement

   Also See for Tascam CD-01 U

   Related Manuals for Tascam CD-01 U

   Summary of Contents for Tascam CD-01 U

  • Page 1

    D00864010A » CD-01 U /CD-01UPro CD PLAYER OWNER’S MANUAL ˛...

  • Page 2

    CE Marking Information a) Applicable electromagnetic environment: E4 b) Peak inrush current: 5.2 A TASCAM CD-01U/CD-01UPro WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. For the customers in Europe WARNING This is a Class A product.

  • Page 3

    • The apparatus should be located close enough to the AC outlet so that you can easily grasp the power cord plug at any time. • An apparatus with Class I construction shall be connect- ed to an AC outlet with a protective grounding connec- tion. TASCAM CD-01U/CD-01UPro...

  • Page 4: Safety Information

    TACT YOUR NEAREST QUALIFIED SERVICE PER- SONNEL, AND DO NOT USE THE PRODUCT IN ITS DAMAGED STATE. Optical pickup: Type: KSM-900AAA Manufacturer: SONY Corporation Laser output: Less than 0.5 mW on the objec- tive lens Wavelength: 775 to 815 nm TASCAM CD-01U/CD-01UPro...

  • Page 5: Table Of Contents

    End of disc/track warning ...23 Eject block ...23 Fader start/Event start ...23 Fader start/stop ...23 Event start ...24 Restoring factory default settings ...24 External parallel control ...24 8 - Specifications Specifications ...25 Dimensional drawing ...26 Error Messages ...26 TASCAM CD-01U/CD-01UPro...

  • Page 6: Supplied Accessories

    1 - Introduction ΠΠEnvironmental considerations Thank you for your purchase of the TASCAM CD- 01U/CD-01U Pro CD player. Before connecting and using the unit, please take time to read this manual thoroughly to ensure you under- stand how to properly set up and connect the...

  • Page 7: Rack-mounting The Unit

    DualDisc. Scratched discs may not play in CD products. A DualDisc may not play in CD-01U/CD-01U Pro and a DualDisc could get stuck in and may not be able to be removed from the CD-01U/CD-01U Pro. TASCAM CD-01U/CD-01UPro...

  • Page 8: Remote Control Unit

    ≠ Point the remote control to the remote sensor on the main unit. Do not obstruct the path between the remote control and the remote sensor. TASCAM CD-01U/CD-01UPro Batteries If batteries are used improperly, or if leakage or break- age occurs, the unit will not function.

  • Page 9: Connections

    Digital stereo amplifiers, mixers and recorders can be connected through the optical digital output terminal. Power source This unit has been designed to operate on the specified power voltage only. Do not plug the power cord into outlets of any other voltage. TASCAM CD-01U/CD-01UPro...

  • Page 10: Features And Their Functions

    Auto Ready mode on and off. 9 PHONES level control Adjusts the headphone output level. TASCAM CD-01U/CD-01UPro 0 DISPLY key Pressing this key changes the time mode on the dis- play. Even when the power is turned off, the time mode is retained.

  • Page 11: Display

    MONO indicator Lights when in Mono output mode. t RESUME indicator Lights when Resume mode is on. y INCR indicator Lights when Incremental Play is activated. u KEY ORIGINAL indicator Lights when Key Original function is turned on. TASCAM CD-01U/CD-01UPro...

  • Page 12: Rear Panel

    3 CONTROL I/O (RS-232C) connector This RS-232C interface allows control by a computer or by other serial controllers. Consult your TASCAM dealer the TASCAM web site for details of this port if you wish to use it. 4 RELAY IN/OUT jacks...

  • Page 13

    CALL key Locates the playback to the last play start point. gª STOP key Use this key to stop playback. When incremental play function is activated, pressing this key pauses at the beginning of the next track. TASCAM CD-01U/CD-01UPro...

  • Page 14: Menu Operation Menu Configuration

    3 Press the PITCH knob on the front panel or ENTER key on the remote control. TASCAM CD-01U/CD-01U Pro menu setting options, some may be made directly using the keys on the remote control.

  • Page 15: Playback

    ISO9660 level 1, level 2 and Joliet. MP3 files are played as the order in the following diagram. In this manner, playback is performed from the top level directories. : Folder (Directory) : MP3 File TASCAM CD-01U/CD-01UPro...

  • Page 16: Playback Modes

    When Auto Cue is off and the CD-01U/CD-01U Pro is in stop or play mode, playback begins after selecting the track. TASCAM CD-01U/CD-01UPro changes the playback mode in the following order: Cont ∑ Single ∑ Program ∑ Random You can also select the playback mode pressing the CALL/PLAY MODE key on the front panel when in SHIFT mode.

  • Page 17: Selecting By Track Number

    During playback standby, using the PITCH knob in shift mode performs the frame accurate search. Also, during playback standby, pressing the JOG +/- keys on the remote control performs the frame search. This function does not operate with MP3 discs. TASCAM CD-01U/CD-01UPro...

  • Page 18: Advanced Operations

    Pressing the CALL key on either the front panel or remote control locates the unit to last play start point, and the unit enters playback standby mode. TASCAM CD-01U/CD-01UPro Turning the Auto Cue function on and off Press the µ key on the front panel when SHIFT indi- cator is lit or A.CUE/DEL key on the remote control to...

  • Page 19: Incremental Play

    There are three additional ways to cancel repeat A-B mode: Press ª key. Search the other track. Eject the CD. Both repeat start (A) and end (B) points can set to with- in a track. This function is not supported for MP3 playback. TASCAM CD-01U/CD-01UPro...

  • Page 20: Intro Check

    Pitch Control function on and off. When the pitch control function is activated, pitch TASCAM CD-01U/CD-01UPro This function works in normal (continuous) play mode and program play mode. To exit the intro check mode, press ª key on either the front panel or remote control, or INTRO CHECK key on the remote control.

  • Page 21: Changing The Playback Speed Without Changing The Key (key Original)

    SKIP keys on the front panel to input the track number of the track to be added. 5 Press the PITCH knob on the front panel or PGM key on the remote control to exit the program mode. TASCAM CD-01U/CD-01UPro...

  • Page 22: Deleting A Programmed Track

    CD-01U's RELAY OUT to the first CD-01U's RELAY IN. 3. Switch on power to all the CD-01Us. TASCAM CD-01U/CD-01UPro 3 Pressing the DISPLAY key and SEARCH ∆ key simultaneously on the front panel or pressing the A.CUE/DEL key deletes the selected track.

  • Page 23: Time Display Switching

    (PRALLEL) terminal on the rear panel and fader start terminal on the external device. RELAY IN See more detailes for the CONTROL I/O terminal in the secsion External parallel control on page 24. STOP CONTROL I/O PIN8 GND START PIN11 FADER STRAT/STOP TASCAM CD-01U/CD-01UPro...

  • Page 24: Event Start

    CON- TROL I/O terminal on the rear panel. REMOTE(PARALLEL) TASCAM CD-01U/CD-01UPro The relay play menu (menu number 06 RELAY) should be set to ON. The following settings are restored to default values.

  • Page 25: Specifications

    19 x 2 x 13.1 (in) 3.5 kg (7.7 lbs)(CD-01U) 3.7 kg (8.1 lbs)(CD-01U Pro) 5 to 40 degrees C (41∞ F to 104∞ F) Due to product improvement, the actual unit may appear differently than illustrations in the operation manual. TASCAM CD-01U/CD-01UPro...

  • Page 26: Dimensional Drawing

    If the errors continue with a number of discs, turn the unit off, wait for a few seconds, and turn it on again. If the errors still continue or other error occurs, contact your TASCAM distributor for repair. TASCAM CD-01U/CD-01UPro 435mm (17.1")

  • Page 27

    CD-01U/CD-01UPro...

  • Page 28

    CD-01 U /CD-01UPro TEAC CORPORATION Phone: +81-422-52-5082 3-7-3, Nakacho, Musashino-shi, Tokyo 180-8550, Japan TEAC AMERICA, INC. Phone: +1-323-726-0303 7733 Telegraph Road, Montebello, California 90640 TEAC CANADA LTD. Phone: +1905-890-8008 Facsimile: +1905-890-9888 5939 Wallace Street, Mississauga, Ontario L4Z 1Z8, Canada TEAC MEXICO, S.A. De C.V Phone: +52-555-581-5500 Campesinos No.

This manual also for:

Cd-01upro

Comments to this Manuals

Symbols: 0
Latest comments: