Table of Contents
Advertisement
Operation messages
Depending on the operation of the unit, the following messages will appear in the main display area.
Message
CANCELED
An operation has been canceled.
-CLEAR-
All programs have been cleared.
CLOSE
The disc tray is closing.
DONE
An operation has completed.
ERASING
A folder is being erased. Do not remove the media.
FINISHED
An operation has completed.
LOADING
Media information is being read.
NO DISC
There is no disc or the disc cannot be verified.
NO FILES
The disc has no files that can be played back.
NO MEDIA
There is no media.
NO NAME
There is no artist data or no file data that can be displayed.
NO TITLE
There is no title data that can be displayed.
OPEN
The disc tray is open.
SETTING
The AUTO SET operation is in progress. Do not remove the media.
TOC READ
TOC information is being read.
WAIT
A file is being processed. Do not remove the media.
Data is being written to the media.
WRITING
Do not remove the media.
Warning messages
If an operation cannot be completed, one of the following messages will appear for about two seconds and then disappear.
Message
FULL
There is not enough space.
NO MEDIA
No media is loaded.
NO PGM
No program has been created.
PGM FULL
No more tracks can be added to the program.
PROTECT
The SD card/USB flash drive is write-protected.
WRT ERR
A file could not be created.
* After deleting a file on an SD card or USB flash drive using a Mac, empty the Trash before ejecting it.
Meaning
Meaning
9 – Message Lists
Response
Load a disc or other media that contains playable
files.
Response
Delete unnecessary files or replace the media.*
Confirm that the media is properly loaded. If this
does not work, try replacing the media.
Add tracks to the program.
A program can contain a maximum of 99 tracks. Clear
tracks from the program and try again.
Unlock the write-protection.
Format the media using a computer. If this does not
work, try replacing the media.
TASCAM CD-200SB
43
Advertisement
Table of Contents
