Lincoln Electric CLASSICII SVM125-A Service Manual page 86

F-36
See Figure F.15 for steps 22 - 24.
22. With the 7/16" wrench, remove the two bolts,
nuts and washers mounting the brush hold-
er assembly to the stator frame.
23. Bend the flat washer away from the rotor
locking nut.
"BENT"
WASHER
NUT
TROUBLESHOOTING & REPAIR
ALTERNATOR ROTOR REMOVAL
AND REPLACEMENT (continued)
FIGURE F.15 – ROTOR REMOVAL
SLEEVE
COLLAR
CLASSIC II
24. With the 1-5/8" socket wrench, remove the
rotor locking nut, washer and sleeve collar.
Note: The sleeve collar will have to be
removed with a gear puller. Be careful not to
damage the rotor slip ring assembly.
Remove the rotor by pulling it free of the
generator shaft.
STATOR
FRAME
BRUSH
HOLDER
ASSEMBLY
F-36