Lincoln Electric CLASSICII SVM125-A Service Manual page 84

F-34
See Figure F.13 for steps 16 - 17.
16. With the 3/4" wrench, remove the copper
strap from the negative output terminal.
Clear the strap from cable ties.
FIGURE F.13 – OUTPUT TERMINAL STRAP AND CASE FRONT REMOVAL
TROUBLESHOOTING & REPAIR
ALTERNATOR ROTOR REMOVAL
AND REPLACEMENT (continued)
CLASSIC II
17. Carefully lift the case front assembly up from
the bottom and carefully slide the assembly
"up" onto the fuel tank mounting rails. Make
sure all leads are clear. Cut any necessary
cable ties.
NEGATIVE OUTPUT
TERMINAL (COPPER
STRAP ON REAR SIDE)
F-34