Lincoln Electric CLASSICII SVM125-A Service Manual page 64

F-14
TEST PROCEDURE
1. Turn engine off.
2. With the 3/8" socket wrench, remove the
left case side.
3. Unlatch, lift and secure the right side door.
Note that there are latches at both ends of
the door.
4. With the 3/8" nut driver or socket wrench,
loosen the two screws on the left side of
the alternator cover. See Figure F.1.
TROUBLESHOOTING & REPAIR
ALTERNATOR ROTOR TEST (continued)
FIGURE F.1 – ALTERNATOR COVER REMOVAL
LOOSEN 5
SCREWS
ALTERNATOR
COVER
SLIP
RINGS
BRUSHES
CLASSIC II
5. With the 3/8" socket wrench, remove the
screw and lock washer from the top center
of the alternator cover. See Figure F.1.
6. With the 3/8" socket wrench, loosen the
two screws on the right side of the alterna-
tor cover.
7. Remove the alternator top cover. Be care-
ful to clear the leads.
8. Locate and lift the brushes off of the rotor
slip rings. See Figure F.1.
F-14