Lincoln Electric CLASSICII SVM125-A Service Manual page 68

F-18
SHUNT FIELD WINDING TEST (continued)
TEST PROCEDURE
1. Turn engine off.
2. Unlatch, lift and secure the right side door.
Note that there are latches at both ends of
the door.
3. Locate plug P10. See Figure F.4.
TROUBLESHOOTING & REPAIR
FIGURE F.4 – PLUG P10 LOCATIONS
CLASSIC II
PLUG P10
4. Remove plug P10. See Figure F.4.
5. Locate the blue lead (U, pin 3) and the
brown lead (N, pin 5) in the harness plug.
See Figure F.5.
F-18