Installing Wall-Mount (MXD) Panels
Installation
Refer to A Note About Wall and Rack Installation on page 27 for important notes
on thermal concerns with Wall and Rack Installations.
S Series touch panels may be installed directly into a solid surface environment, using either solid surface screws or the
included locking tabs for different mounting options. Once installed, the panel is contained within a clear outer housing
known as the Backbox (FIG. 16).
FIG. 16
S Series Backboxes - Locking Tabs
This Backbox is removed to install the device into a wall or when using the optional Rough-In Box accessory. Refer to
Removing the Backbox on page 29 for Backbox removal.
For typical mounting surfaces, such as drywall, use the locking tabs as the primary
method for securing the Backbox to the surface. For thin walls or solid surfaces, use
mounting screws (not included).
30
Locking tabs
MXD-1001-L
Locking tabs
Locking tab
MXD-701-L
Locking tab
Locking tab
MXD-431-L
Locking tab
Modero S Series G4 Touch Panels Instruction Manual