Installing Tabletop (Mxt) Panels; Mst-1001/701/431; Connector Locations; Power Via Power Over Ethernet - AMX MST-1001 Instruction Manual

Installing Tabletop (MXT) Panels

MST-1001/701/431





Connector Locations

USB peripherals (mouse, keyboard, etc.) may be connected to the USB port on the rear of the device. Updates to the
device's firmware can also made via the USB port.
Note that FIG. 12 shows a MST-1001, but the connector locations are similar for all MST panels:
USB Port
RJ-45 Port
FIG. 12 MST-1001 Connector Location

Power via Power Over Ethernet

Power for the MST-1001 is supplied via Power Over Ethernet (PoE), utilizing an AMX-certified, capacitive touch-
compliant PoE injector such as the PS-POE-AT-TC High Power PoE Injector (FG423-83) or other approved AMX PoE
power source.
The incoming Ethernet cable should be connected to the RJ45 port on the panel.
Modero S Series G4 Touch Panels Instruction Manual
Detailed specifications drawings for the
Detailed specifications drawings for the
Detailed specifications drawings for the
MST-1001 are available to download from www.amx.com.
MST-701 are available to download from www.amx.com.
MST-431 are available to download from www.amx.com.
Installing Tabletop (MXT) Panels
25