Multi Drawer (Mdl-8) - Casio QT-2000 Service Manual

6-4. Multi drawer (MDL-8)

1. Release the screw which is fixing the keyboard and take tke keyboard out.
2. Round the cable of connector sub ass'y for drawer to ferrite core as following figure.
2. Remove the Main PCB and mount the following pars.
3. Connect the connector for FG to FG plate.
Location Code No.
Q9 22304151 Transistor
D16 23010127 Diode
62195096 Connector sub ass'y for drawer E32564-2(#24-800)
62214686 connector for FG
30304055 Ferrite core
Not used 26004918 Carbon film resistor
Not used 26007313 Carbon film resistor
51501640 Screw
Location for mounting parts
Sloder the connector
ass'y for drawer here.
N a m e Specification
2SD1853
1SR35-100A
E31553-17(#20-800)
L5T18X6X10
R-25-1K-J
R-25-10K-J
3x10 ZMC-3
Round the cable of drawer connector.
Mount the transistor and diode here.
— 38 —
Q'ty
1
1
1
1
1
1
1
2