Multi-Drawer Circuit - Casio TK-6500 Service Manual

Electronic cash register
Hide thumbs Also See for TK-6500:
Table of Contents

Advertisement

2) Multi-drawer kit (TK-6500 only Drawer 2)
2-1. Prepare the following parts kit for multi-drawer circuit. The parts kits are supplied from sales
division.
MDL-10
Multi-drawer kit
2-2. Check whether the parts of multi-drawer kit are as follows:
Code No. Parts Name
10006121 Drawer connector cable
62481534 Extension cable for Drawer E440714*1
59000209 Screw
2-3. Connect the drawer connector cable to the main PCB by solder.
2-4. Open the back cover of lower cabe to release the 2 screws. Then, connect the necessary
extension cable for drawer. In this case, do no forget to fix the FG wire of the extension
cable to the frame ground by the screw.
Release the 2 screws and open the
back cover of lower case.
2-5. Connect 1 pin FG connector of the drawer extension cable to the drawer 1 pin connector.
Close the back cover of lower case by 2 screws.
Specification
Q'ty
E440721A*1
1
1
3X4ZMC-3.
1
Drawer2
Not used
Connect the extension
drawer cable to the
drawer connector.
— 21 —
Not used
Red
Brown
Black
Fix the FG wire of the
extension drawer cable by
screw of the parts kit.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ex-577a

Table of Contents