To Initialize Qt-2000 Terminal(Add/Replace One Qt-2000) - Casio QT-2000 Service Manual

4-2. To initialize QT-2000 terminal (add/replace one QT-2000)
Preparation:
1. All peripheral devices and QT-2000 terminals of this cluster should be turned off.
2. Connect all of the peripheral devices (such as printer, display etc.) to this QT-2000 terminal.
3. Connect this QT-2000 terminal to in-line.
Operation:
Date
Time
ID Character
Check System
Date
KP System
Time
R/J/Order Printer
Slip Printer
ID Character
Rear Display
Check System
Remote Display
KP System
OK?
R/J/Order Printer
Slip Printer
Rear Display
Remote Display
OK?
Date
Time
ID Character
Check System
KP System
R/J/Order Printer
Slip Printer
Rear Display
Remote Display
OK?
Date
Time
ID Character
Check System
KP System
R/J/Order Printer
Slip Printer
Rear Display
Remote Display
OK?
Date
Time
ID Character
Check System
KP System
R/J/Order Printer
Slip Printer
Rear Display
Remote Display
OK?
00-00-00
12:34 00
MC #01
Master
97-12-15
4. Turn on all peripheral devices of this QT-2000 terminal.
Master
12:34 00
SA-3015
And turn on all QT-2000 except this terminal of the cluster.
SA-3015
MC #01
No
Master
5. Turn on this QT-2000 terminal with pressing the left-most
No
Master
Yes
SA-3015
key of the top row and release the key after buzzer sounds.
SA-3015
No
6. After releasing the key, enter 10000 (for Eu/Di)/20000 (U.S.)
No
YES
and press the right part of the <ST> key.
7. Enter the current date (YY/MM/DD order) and time and
press the <Yes> key.
97-12-15
12:34 00
MC #01
Master
Master
SA-3015
8. In ID character field, the auto-defined ID No. is shown.
SA-3015
No
Please check if the same value is set in this field.
No
YES
We recommend that you should not change the value.
97-12-15
12:34 00
MC #01
Master
Master
SA-3015
9. In these fields, you can select
SA-3015
No
No
YES Please choose former options and press the <Yes> key.
97-12-15
12:34 00
MC #01
Master
Master
SA-3015
10. In this field, you can select, "1.Non/2.UP-350/3.TM-U950"
SA-3015
No
for R/J/Order printer.
No
1
YES
Please choose former option and press the <Yes> key.
— 14 —
"1.Master/2.Backup Master/3.Satellite."