To Flag Clear Qt-2000 Terminal(Init2, Restore From Flash) - Casio QT-2000 Service Manual

4-3. To flag clear QT-2000 terminal (INIT2, Restore from flash)
Preparation:
1. All peripheral devices and this QT-2000 terminal should be turned off.
2. Check the connection of all peripheral devices (such as printer, display etc.) of this
QT-2000 terminal.
3. Check the connection of this QT-2000 terminal to in-line.
Operation:
15-12-97 12:34
INIT
1.Flag Clear
2.Init2
3.Restore
Note:
Performing "Init 2" requires password "8888888888" and
performing "Restore" requires password "0000000000."
4. Turn on all peripheral devices of this QT-2000 terminal.
5. Turn on this QT-2000 terminal with pressing the right-most
key of the top row and release the key after buzzer sounds.
6. After releasing the key, press the right part of the <ST> key.
7. Select "1.Flag Clear" and press the <Yes> key.
The flag clear operation is finished.
0.00
— 17 —