Mcr Unit (Qt-2046Mc) - Casio QT-2000 Service Manual

6-3. MCR Unit (QT-2046MC)

1. Release the screw which is fixing the keyboard and take tke keyboard out.
2. Remove the Main PCB and solder the connector which is in the QT-2046MC carton to the
location CN1 on Main PCB.
2. Mount the MCR unit on the lower case by screws and insart the cable to inside of the machine
from connector place.
4. Set the MAin PCB and connect the cable to CN1 on Main PCB.
Cable for MCR is set
like this.
MCR mount stand
Screw here to mount
the MCR unit.
Solder the connector here.
— 37 —