Rear Display (Qt-2060D) - Casio QT-2000 Service Manual

6-2. Rear Display (QT-2060D)

1. Release the screw which is fixing the keyboard and take tke keyboard out.
2. Remove the rear display window.
Release these screws
Slide the keyboard to the allow direction
3. Mount the display fixing plate (L).
4. Set the display PCB and display fixing plate (R), then tighten the screw.
5. Connect the display cable to CN15 of Main PCB.
Note : FG wire of the power code does not set behind displat PCB.
In case the FG wire is set behind the display PCB,the display might occurred flickering
problem.
Display fixing plate (L)
Display fixing plate (R)
Rear display window
CN15
— 36 —