Initialize Operation; To Initialize Qt-2000 Terminal - Casio QT-2000 Service Manual

4. INITIALIZE OPERATION

4-1.To initialize QT-2000 terminal

Preparation:
1. All peripheral devices and QT-2000 terminals of this cluster should be turned off.
2. Connect all of the peripheral devices (such as printer, display etc.) to QT-2000 terminal.
3. Connect all QT-2000 terminals by in-line.
Operation:
Date
Time
ID Character
Date
Check System
Time
KP System
R/J/Order Printer
ID Character
Slip Printer
Check System
Rear Display
KP System
Remote Display
R/J/Order Printer
OK?
Slip Printer
Rear Display
Remote Display
OK?
Date
Time
ID Character
Check System
KP System
R/J/Order Printer
Slip Printer
Rear Display
Remote Display
OK?
Date
Time
ID Character
Check System
KP System
R/J/Order Printer
Slip Printer
Rear Display
Remote Display
OK?
Date
Time
ID Character
Check System
KP System
R/J/Order Printer
Slip Printer
Rear Display
Remote Display
OK?
4. Turn on all peripheral devices of a QT-2000 terminal.
5. Turn on this QT-2000 terminal with pressing the left-most
00-00-00
12:34 00
key of the top row and release the key after buzzer sounds.
MC #01
6. After releasing the key, enter 10000 (for Eu/Di)/20000 (U.S.)
97-12-15
Master
12:34 00
Master
and press the right part of the <ST> key.
SA-3015
MC #01
SA-3015
Master
No
Master
No
SA-3015
Yes
SA-3015
No
No
7. Enter the current date (YY/MM/DD order) and time and
YES
press the <Yes> key.
97-12-15
12:34 00
MC #01
Master
8. In ID character field, the auto-defined ID No. is shown.
Master
SA-3015
We recommend that you should not change the value.
SA-3015
No
No
YES
97-12-15
12:34 00
MC #01
9. In these fields, you can select
Master
Master
SA-3015
SA-3015
Please select one of these options and press the <Yes> key.
No
No
YES
97-12-15
12:34 00
10. In this field, you can select, "1.Non/2.UP-350/3.SA-3015"
MC #01
Master
for R/J/Order printer.
Master
SA-3015
Please select one of these options and press the <Yes> key.
SA-3015
No
1
No
YES
"1.Master/2.Backup Master/3.Satellite."
— 11 —