Initialize (Mac) Operation; F-Init (Fmac) Operation - Casio TK-6500 Service Manual

2. INITIALIZE (MAC) OPERATION (TK-6500)
1. Plug the power cord into an AC outlet.
2. Set the mode switch to "OFF" position.
3. While pressing the Journal feed Button, turn the mode switch to "PGM" position.
4. Release the Journal feed button.
5. Input the MAC CODE 1. (11 digits)
6. Press "#2" key. (Wait until beep twice.)
7. Input the MAC CODE 2. (3 digits. Without inline option board, do not enter any number.)
8. Press "#2" key. (Initialization receipt is issued.)
9. Initialize operation is executed.
MAC CODE 1 : D11 to D1 (11 digits)
Description
Print PGM mode password, when flag clear
Password in PGM3 to 7 mode
Messages and descriptions are written in
English=0, French=1, Spanish=2, German=4
Model for
USA or Canada=2, German=4,
Other area (0.00) =1, Other area (0) = 3
Fixed number = 08
Use clerk switch or push switch = 0
Use clerk lock Key or secrec code key = 1
Use Euro only
MAC CODE 2 : D3 to D1 (3 digits)
Description
Inline baud rate
Inline physical I.D. number (01 to 32)

3. F-INIT (FMAC) OPERATION

1. Plug the power cord into an AC outlet.
2. Set the mode switch to "OFF" position.
3. While pressing the Receipt feed button , turn the mode switch to "PGM" position.
4. Release the receipt feed button.
5. Press "#2" key.
Note : The location of "#2" key, see "HARD KEY CODE TABLE" on page 29.
Choice
Yes = 0
No = 4
Significant
number 4 digits
Significant
number
Significant
number
Fixed
Significant
number
No = 0
Yes = 1
Choice
156Kbps = 0
312Kbps = 1
Significant
number 2 digits
— 4 —
Program code
D11 =
D10 to D7 =
D6 =
D5 =
D3 D4 =
D2 =
D1 =
Program code
D3 =
D2 to D1 =