Updating The Software; Receiving The Update Information; Starting The Update Immediately; Starting The Update Later - Pace DC 221 User Manual

UPDATING THE SOFTWARE

To keep you up-to-date with the latest developments
in digital television, new features may be made
available to your set-top box in the form of a
software update. These updates are sent to your set-
top box automatically over the cable network.

RECEIVING THE UPDATE INFORMATION

Whenever a software update is available, a
message is sent to your set-top box. When you see
this message, we recommend that you start the
update immediately.
NOTE: This may take up to 15 minutes.
If you do not want to update immediately, you can
either:
set your set-top box to be updated
●
automatically later on, or
refuse the automatic update.
●

STARTING THE UPDATE IMMEDIATELY

To start the update immediately, press the OK
button.
As the update is carried out, a progress bar is
displayed. When the update is complete, your set-
top box will then store its new software and start
using it.
IMPORTANT: You must not switch your set-top
box off while it is storing the new software,
regardless of how you start the update.

STARTING THE UPDATE LATER

To set your set-top box to be updated later on,
press the blue button.
UPDATING THE SOFTWARE
Nothing will happen until you press the S button
to put your set-top box into standby. After that,
the next time you bring your set-top box out of
standby, the update will take place.

REFUSING THE AUTOMATIC UPDATE

If you choose not to update, press Zurück. We do,
however, recommend that you carry out a
software update from the Service Sub-Menu (see
below) as soon as is conveniently possible, to
make sure you have all the latest features. If you
refuse three times, you will not be asked again
until a further upgrade is available.
NOTE: In some instances, your set-top box may be
updated automatically without giving you the
option to refuse the update.
USING THE MENUS TO UPDATE THE
SOFTWARE
When a software update is available, you can start
it from the menus. Press the Menü button to
display the Settings Menu, highlight 'Service
Menu' and press OK, then highlight 'Software
update' and press OK.
If there is no update available you will see a
message to tell you.
If there is an update available, follow the on-
screen instructions. Once the update has started,
a progress bar is displayed. When the update is
finished, your set-top box will start up with its
new software.
. 41
Kabel Digital