Pace DC 221 User Manual page 56

8 . CONNECTING UP
CONNECTION METHOD 2:
Connecting to a TV and VCR
01. Connect the lead from your cable service
provider to the connector marked HF-
EINGANG on your set-top box.
02. Connect the supplied SCART lead between
the TV SCART socket on your set-top box
and the SCART socket on your TV.
03. Connect another SCART lead (not supplied)
between the VCR/AUX SCART socket on
your set-top box and the SCART socket on
your VCR.
Kabel Digital
Mains lead
SCART lead
ZIEHEN SIE IMMER DEN NETZSTECKER,
BEVOR SIE DEN DECKEL ENTFERNEN
ES BEFINDEN SICH KEINE WARTUNGSFÄHIGEN TEILE DARIN
230V 50-60Hz
TV
Mains lead
Mains lead
04. Connect the supplied RF lead between the
HF-AUSGANG socket on your set-top box
and the AERIAL IN socket on your VCR.
05. Connect another RF lead (not supplied)
between the TV OUT socket on your VCR and
the AERIAL IN socket on your TV.
06. Plug the 2-way connector on the supplied
mains lead into the mains socket (marked
230V 50-60Hz) on your set-top box.
07. When all the connections are properly
made, connect all the equipment to the
mains supply.
TV
AUDIO HF-AUSGANG
L R
DIGITAL-AUDIO
VCR/AUX AUSGANG
SCART lead
IN OUT
TV
Cable
input
Set-top box
HF-EINGANG
RF leads
VCR