Connecting Your Set-Top Box - Pace DC 221 User Manual

CONNECTING YOUR
SET-TOP BOX
Before starting, choose a suitable position for
your set-top box, observing the ventilation
requirements set out on page 4.
NOTE: You do not need to connect your TV aerial
to your TV, because the national terrestrial
channels are included in the cable service.
Provided you connect up as shown, you can still
tune your TV to these channels. Your set-top box
must be plugged in, but does not need to be
switched on.
WARNING: Before you connect or disconnect your
set-top box to/from any other equipment, make
sure you disconnect all the equipment from the
mains supply.
Mains lead
Mains lead
ZIEHEN SIE IMMER DEN NETZSTECKER,
BEVOR SIE DEN DECKEL ENTFERNEN
ES BEFINDEN SICH KEINE WARTUNGSFÄHIGEN TEILE DARIN
230V
SCART lead
50-60Hz
TV
CONNECTION METHOD 1:
Connecting to a TV
01. Connect the lead from your cable service
provider to the connector marked HF-
EINGANG on your set-top box.
02. Connect the supplied RF lead between the
HF-AUSGANG socket on your set-top box
and the AERIAL IN socket on your TV.
03. Connect the supplied SCART lead between
the TV SCART socket on your set-top box
and the SCART socket on your TV.
04. Plug the 2-way connector on the supplied
mains lead into the mains socket (marked
230V 50-60Hz) on your set-top box.
05. When all the connections are properly
made, connect all the equipment to the
mains supply.
RF lead
AUDIO HF-AUSGANG
L R
DIGITAL-AUDIO
VCR/AUX
AUSGANG
CONNECTING UP
TV
Cable
input
Set-top box
HF-EINGANG
Kabel Digital
. 7