Optional Connections; Switching On Your Set-Top Box - Pace DC 221 User Manual

OPTIONAL CONNECTIONS

To make the most of your set-top box and digital
television you may wish to connect your set-top
box to audio equipment, such as a hi-fi amplifier
or home cinema system.
Hi-fi amplifier
ZIEHEN SIE IMMER DEN NETZSTECKER,
BEVOR SIE DEN DECKEL ENTFERNEN
ES BEFINDEN SICH KEINE WARTUNGSFÄHIGEN TEILE DARIN
230V 50-60Hz
SWITCHING ON YOUR
SET-TOP BOX
When you have connected your set-top box to the
mains supply, its indicator light will light up.
If your set-top box is in standby, the light will be
orange; if your set-top box is out of standby, the
light will be green.
To switch on your set-top box, first make sure that
your TV is switched on. Press the Standby button
L
R
Stereo phono leads
VCR/AUX
TV
CONNECTING UP
01. Disconnect all the equipment from the
mains supply.
02. Connect your set-top box to your audio
equipment, using one of the methods
shown in the diagram below.
03. When all the connections are properly
made, re-connect all the equipment to the
mains supply.
Home cinema system
Optical digital
audio lead
AUDIO HF-AUSGANG
L R
DIGITAL-AUDIO
AUSGANG
(S) on the front panel of your set-top box, so that
the light is green.
If you do not see the Language screen (see page
10) or a digital channel, use your TV's remote
contol to select the correct AV channel on your TV.
Whenever you are not using your set-top box, you
should put it into standby by pressing the
Standby button (S).
.
HF-EINGANG
Kabel Digital
9