Safety Precautions; Description; Specifications - Cornelius 2230 C4-100 Manual

Ce/soft drink pre-mix dispenser

Hide thumbs

Table Of Contents

Table of Contents

Always: disconnect power to the dispenser before servicing or cleaning.

Never: place hands inside of hopper or gate area without disconnecting power to the dispenser. Agitator rota-

tion occurs automatically when dispenser is energized!

This ice dispenser has been specifically designed to provide protection against personal injury and eliminates

contamination of ice. To insure continued protection and sanitation, observe the following:

ALWAYS: be sure the removable lid is properly installed to prevent unauthorized access to the

hopper interior and possible contamination of the ice.

ALWAYS: be sure the upper and lower front panels are securely fastened.

ALWAYS: keep area around the dispenser clean of ice cubes.

Dispenser cannot be used with crushed or flaked ice.

CAUTION:

Use of bagged ice which has frozen into large chunks can void warranty. The

dispenser agitator is not designed to be an ice crusher. Use of large chunks of

ice which "jam up" inside the hopper will cause failure of the agitator motor and

damage to the hopper. If bagged ice is used, it must be carefully and completely

broken into small, cube--sized pieces before filling into the dispenser hopper.

DESCRIPTION

The 2230 series of ice dispensers solves your ice and beverage service needs in the sanitary, space saving,

economical way. Designed to be manually filled with ice from any remote ice making source, or top mount ice

maker, these dispensers will dispense cubes (up to 1--1/4"in size), cubelets and hard--chipped or cracked ice;

and, in addition, several flavors of pre--mix beverages.

The sink can be easily and quickly removed. The unit must never be lifted or moved by the sink.

Dispensers include faucets and cold plates and are designed to be supplied direct from syrup tanks, with no

additional cooling required.

IMPORTANT: For dispensing nugget ice (Model MH750/NM650 Ice Makers), part number 27065 Ice

Diverter must be installed on the dispenser. (See INSTALLATION INSTRUCTIONS).

Model:

Ice Storage:

Maximum Number of Faucets Available:

Built--in Cold Plate:

Electrical:

Dimensions:

Dispensing System Rated