Making Adjustments And Selections - Panasonic PT-DX820 Operating Instructions Manual

Chapter 3 Basic Operations — Switching on/off the projector
Initial setting (date and time)
Set the local date and time. After completed the initial setting, you can change the setting from the [PROJECTOR
SETUP] menu → [DATE AND TIME].
To set the date and time automatically, refer to "Setting the date and time automatically" (x page 125).
1) Press as to select an item.
2) Press qw to switch the setting.
3) Press the <ENTER> button.
f Confirm the setting value and complete the initial setting.

Making adjustments and selections

It is recommended that images be projected continuously for at least 30 minutes before the focus is adjusted.
1) Press the <FOCUS> button to roughly adjust the focus of the image. (x page 62)
2) Change the setting of the [PROJECTOR SETUP] menu → [PROJECTION METHOD] depending on the
installation mode. (x page 31)
f Refer to "Navigating through the menu" (x page 71) for the operation of the menu screen.
3) Press the input selection (<RGB1> and <RGB2>, or <RGB1/2>, <DIGITAL LINK>, <DVI-D>, <VIDEO>,
<SDI>, <HDMI>) button to select the input signal.
(SDI input is supported only for PT-DZ780.)
4) Adjust the front, back and sideway tilt of the projector with the adjustable feet. (x page 46)
5) Press the <SHIFT> button to adjust the position of the image.
6) If the input signal is an RGB signal, press the <AUTO SETUP> button.
7) Press the <ZOOM> button to adjust the size of the image to match the screen.
8) Press the <FOCUS> button again to adjust the focus.
9) Press the <ZOOM> button again to adjust the zoom and the size of the image to match the screen.
60 - ENGLISH
INITIAL SETTING
YEAR 20XX
1
MONTH
1
DAY
12
HOUR
34
MINUTE
56
SECOND
Please set the date and time of the built-in clock of the
projector.
MENU SELECT CHANGE
SET
ENTER
3)
6)
4)
6/6
2) 1) 5) 7) 8) 9)
1) 8)
6)
5)
7) 9)
2)
3)