Panasonic PT-DX820 Operating Instructions Manual page 100

3) Press as to select [EDID SELECT].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[EDID3]
[EDID1]
[EDID2:PC]
5) Press as to select [SIGNAL LEVEL].
6) Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
[0-255:PC]
[16-235]
Note
f The optimal setting varies depending on the output setting of the connected external device. Refer to the operating instructions of the
external device regarding the output of the external device.
f The data for Plug and play will change when the setting is changed. Refer to "List of compatible signals" (x page 186) for a resolution that
supports plug and play.
Setting [EDID MODE]
1) Press as to select [DVI-D IN].
2) Press the <ENTER> button.
f The [DVI-D IN] screen is displayed.
3) Press as to select [EDID MODE].
4) Press the <ENTER> button.
f The [DVI-D EDID MODE] screen is displayed.
5) Press qw to switch [EDID MODE].
f The items will switch each time you press the button.
[DEFAULT]
[SCREEN FIT]
[USER]
f When [DEFAULT] or [SCREEN FIT] is selected, proceed to Step 10).
6) Press the <ENTER> button.
f The [RESOLUTION] screen is displayed.
7) Press asqw to select [RESOLUTION].
f Select [1024x768p], [1280x720p], [1280x768p], [1280x800p], [1280x1024p], [1366x768p], [1400x1050p],
[1440x900p], [1600x900p], [1600x1200p], [1680x1050p], [1920x1080p], [1920x1080i], or [1920x1200p].
8) Press the <ENTER> button.
f The [VERTICAL SCAN FREQUENCY] screen is displayed.
9) Press qw to select [VERTICAL SCAN FREQUENCY].
f Select [60Hz], [50Hz], [30Hz], [25Hz], or [24Hz] when [1920x1080p] is selected for [RESOLUTION].
f Select [60Hz], [50Hz], or [48Hz] when [1920x1080i] is selected for [RESOLUTION].
f Select [60Hz] or [50Hz] when anything other than [1920x1080p] or [1920x1080i] is selected for
[RESOLUTION].
100 - ENGLISH
Chapter 4 Settings — [DISPLAY OPTION] menu
Recognizes movie-based video signals and still image signals automatically.
Select this item mainly when an external device that outputs movie-based video signals (such as a
Blu-ray disc player) is connected to the <DVI-D IN> terminal.
Select this item mainly when an external device that outputs still image-based video signals (such as
a computer) is connected to the <DVI-D IN> terminal.
Automatically sets the signal level.
Select this item when the signal output from the DVI-D terminal of an external device (such as a
computer) is input to the <DVI-D IN> terminal.
Select this item when the signal output from the HDMI terminal of an external device (such as a Blu-
ray disc player) is input to the <DVI-D IN> terminal via a conversion cable or similar cable.
Standard setting.
Changes EDID data according to the [SCREEN FORMAT] setting.
Sets the [RESOLUTION] and [VERTICAL SCAN FREQUENCY] items to EDID.