[Position] Menu; [Shift]; [Aspect] - Panasonic PT-DX820 Operating Instructions Manual

[POSITION] menu

On the menu screen, select [POSITION] from the main menu, and select an item from the sub-menu.
Refer to "Navigating through the menu" (x page 71) for the operation of the menu screen.
f After selecting the item, press asqw to adjust.
Note
f When the optional DIGITAL LINK output supported device (Model No.: ET-YFB100G, ET-YFB200G) is connected to the <DIGITAL LINK/
LAN> terminal, adjust the shift, aspect, and clock phase from the menu of DIGITAL LINK output supported device at the beginning.

[SHIFT]

Move the image position vertically or horizontally if the image projected on the screen is still out of position even
when the positions of the projector and screen are correct.
1) Press as to select [SHIFT].
2) Press the <ENTER> button.
f The [SHIFT] screen is displayed.
3) Press asqw to adjust the position.
Orientation
Vertical (up and down)
adjustment
Horizontal (right and left)
adjustment

[ASPECT]

You can switch the aspect ratio of the image.
The aspect ratio is switched within the screen range selected in [SCREEN SETTING]. Set [SCREEN SETTING]
first. (x page 95)
1) Press as to select [ASPECT].
2) Press qw or the <ENTER> button.
f The [ASPECT] individual adjustment screen is displayed.
3) Press qw to switch the item.
f The items will switch each time you press the button.
[DEFAULT]
[AUTO]
*1
Chapter 4 Settings — [POSITION] menu
Operation
Press a. The image position moves up.
Press s. The image position moves down.
The image position moves to the right.
Press w.
Press q. The image position moves to the left.
Displays images without changing the aspect ratio of the input signals.
The projector identifies the video ID (VID) embedded in the video signals and displays the image by
automatically switching the screen sizes between 4:3 and 16:9. This function is effective for 480i/480p
signals.
Adjustment
ENGLISH - 83