Panasonic PT-DX820 Operating Instructions Manual page 158

[User] account
1 [Account]
Displays the account to change.
2 [New]
[User name]:
Enter the desired new user name. (Up to 16 characters in single
byte)
[Password]:
Enter the desired new password. (Up to 16 characters in single
byte)
[Password(Retype)]:
Enter the desired new password again.
[Change password] (For user rights)
Only the change of password is enabled under the user rights.
1 [Old Password]
Enter the current password.
2 [New Password]
Enter the desired new password. (Up to 16 characters in single
byte)
Note
f To change the account of the administrator, you must enter the [User name] and [Password] in [Current].
[Crestron Connected(TM)] page
The projector can be monitored/controlled with Crestron Connected
To start the operation page of Crestron Connected
administrator rights. (For user rights, the [Crestron Connected(TM)] button is not displayed on the web control
screen.)
The operation page of Crestron Connected
It is not displayed if Adobe Flash Player is not installed on your computer, or the browser you use does not
support Flash. In that case, click [Back] on the operation page to go back to the previous page.
158 - ENGLISH
Chapter 4 Settings — [NETWORK] menu
from the web control screen, you need to access with the
TM
is displayed by clicking [Crestron Connected(TM)].
TM
1
2
3
3 [OK]
Determines the change of password.
1
2
3
4
3 [Retype]
Enter the desired new password again.
4 [OK]
Determines the change of password.
.
TM