• SWITCHING TO RADIO MODE
Press MOD button (6) shortly to select
radio mode, the radio mode appears
in the display together with the memory
band and frequency.
• SELECTING THE FREQUENCY
At radio mode, press BND/LOUD
button (13) shortly to select the desired
The reception band will change in the
• STATION SELECTION
Press MANU/SKIP +
activate automatic seek function.
Press for several seconds until
"MANUAL" appears on the display,
the manual tuning mode is selected.
If both buttons are not pressed for
several seconds, they will return to
seek tuning mode and "AUTO"
appears on the display.
Press LOC button (3) to select
between local and distant stations.
Local setting for reception of strong
station, and a distant setting for
reception of weaker stations. This
function is in effect during AUTO
-button(16) shortly to
• AUTOMATIC MEMORY
STORING & PROGRAM SCANNING
- Automatic Memory Storing
Press AMS button (18) for several
seconds, the radio searches from
the current frequency and checks
the signal strength until one cycle
search is finished. The six
strongest stations will be stored into
the corresponding preset number
- Program Scanning
Press AMS button (18) shortly to
scan preset station stored in memory.
• STATION STORING
Press any one of the preset buttons
(14) (M1 to M6) to select a station
which had been stored in the memory.
Press this button for several seconds
(until 2'nd beeps come out) to store
current station in that preset button.
Press MON button (1) to select mono or
stereo mode. You can sometimes
improve reception of distant stations by
selection mono operation.
• SWITCHING TO CD MODE
If there is no CD inserted in the player :
When the front panel is in State 2 and
the unit is on, press EJECT button (4),
the panel will change into State 3 and
display the disc slot (5). Gently insert the
CD with the printed side on top into the
CD compartment until you feel some
resistance. The CD is drawn into the
player automatically and the panel will
automatically turn up. CD playback