Crankshaft Pulley - To Fit A Wear Sleeve - Perkins 700 Series User Handbook Manual

Section 14
Crankshaft Assembly
Operation:

Crankshaft pulley - to fit a wear sleeve

Recommended torque:
Engine type a
-
-
-
Suitable for a wear sleeve
Unsuitable for a wear sleeve
05/99
Printed in England
© Propriety information of Perkins Engines Company Limited, all rights reserved
Special notes and tools
lbf ft kgf m With the pulley removed, carefully fit the wear sleeve in accordance with the
manufacturers instructions (supplied with the sleeve).
Ensure that the sleeve is fitted correctly to the pulley (A) .
700 Series
:
A
14.02
64