2.6.1
Boot Settings Configuration
2.6.1.1
Quick Boot
Allow BIOS to skip certain tests while booting. The system Configure Summary will
be skipped. This will decrease the time needed to boot the system. The default set-
ting is on "Enabled".
2.6.1.2
Quiet Boot
Used to display OEM logo when the setting is "Enabled". The default setting, "Dis-
abled", displays normal POST message.
2.6.1.3
Wait For 'F1' If Error
Wait for the F1 key to be pressed if an error occurs.
2.6.1.4
Interrupt 19 Capture
Allow option ROMs to trap interrupt 19. This is required by some PCI cards that pro-
vide a ROM based setup utility.
MIC-3393 User Manual
Figure 2.20 Boot settings configuration
42