Related Manuals for Advantech MIC-3392A-M1E
Summary of Contents for Advantech MIC-3392A-M1E
- Page 1 (217) 352-9330 | Click HERE Find the Advantech MIC-3392A-M1E at our website:...
- Page 2 User Manual MIC-3392 6U CompactPCI ® Intel Core™2 Duo Processor- Based Board with Dual PCIe GbE/DDR2/SATA/PMC Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
- Page 3 No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable. How- ever, Advantech Co., Ltd.
- Page 4 This product has passed the CE test for environmental specifications when shielded cables are used for external wiring. We recommend the use of shielded cables. This kind of cable is available from Advantech. Please contact your local supplier for ordering information.
- Page 5 Notes provide optional additional information. Document Feedback To assist us in making improvements to this manual, we welcome comments and constructive criticism. Please send all such - in writing - to: support@advantech.com Packing List MIC-3392 all-in-one single board computer x1...
- Page 6 The sound pressure level at the operator's position according to IEC 704-1:1982 is no more than 70 dB (A). DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech disclaims all responsibility for the accuracy of any statements contained herein.
- Page 7 Safety Precaution - Static Electricity Follow these simple precautions to protect yourself from harm and the products from damage. To avoid electrical shock, always disconnect the power from your PC chassis before you work on it. Don't touch any components on the CPU card or other cards while the PC is on.
-
Page 8: Table Of Contents
Contents Chapter Hardware Configuration......1 Introduction ....................2 Table 1.1: MIC-3392 Variants............2 Specifications .................... 3 1.2.1 CompactPCI Bus Interface ............3 1.2.2 CPU ....................3 1.2.3 Processor..................3 Table 1.2: Intel Processors............3 1.2.4 BIOS ..................... 3 1.2.5 Chipset..................4 1.2.6 Memory .................. - Page 9 1.5.3 USB Connector (CN11/12 and Rear I/O)........14 1.5.4 CompactFlash Socket (CN10) ............ 14 1.5.5 SATA daughter board connector (CN4) (Single PMC only)..15 1.5.6 Ethernet Configuration (RJ1/RJ2 or Rear I/O RJ1) ....15 1.5.7 PMC Connector (J23 for PMC1, Jxx for PMC2) ......15 1.5.8 SW1 (System reset and BMC reset button)........
- Page 10 Figure 2.20Exit Option ..............38 2.9.1 Save Changes and Exit .............. 38 2.9.2 Discard Changes and Exit ............38 2.9.3 Load Defaults................38 Chapter IPMI .............39 Introduction ..................... 40 Definitions ....................40 IPMI function list..................40 3.3.1 IPMI Device Global Commands..........41 Table 3.1: Supported IPMI commands ........
- Page 11 A.5.1 M/D, PWR & IDE/Hot-swap LEDs ..........56 Appendix B Programming the Watchdog Timer . 57 Watchdog Timer Programming Procedure ..........58 Appendix C CPLD ..........59 Features....................60 CPLD I/O Registers ................60 Table C.1: LPC I/O registers address ........60 C.2.1 Debug Message................
-
Page 12: Chapter 1 Hardware Configuration
Chapter Hardware Configuration This chapter describes how to configure MIC-3392 hardware. Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... -
Page 13: Introduction
Introduction The MIC-3392 is a high performance, power efficient CompactPCI single-board com- puter based on the Intel Core 2 Duo and Core Duo microprocessors. The MIC-3392 delivers breakthrough energy-efficient performance for CompactPCI platforms. The Intel Core 2 Duo provides enhanced energy-efficient performance to help equipment manufacturers optimally balance processing capabilities within power and space con- straints. -
Page 14: Specifications
Specifications 1.2.1 CompactPCI Bus Interface The MIC-3392 is compliant with PICMG 2.0 Rev. 3.0. It supports a 64-bit / 66 MHz or 33 MHz PCI bus for up to 8 CompactPCI slots at 3.3 V or 5 V VIO. The MIC-3392 is hot-swap compliant (PICMG 2.1) and conforms to the CompactPCI Packet Switching Backplane specification (PICMG 2.16) as well as the CompactPCI System Manage- ment Specification (PICMG 2.9). -
Page 15: Chipset
1.2.5 Chipset The Mobile Intel 945GM Express / 945GME chipset provides excellent flexibility for developers of embedded applications by offering improved graphics and increased I/ O bandwidth over previous Intel chipsets, as well as remote asset management capabilities and improved storage speed and reliability. Features include an inte- grated 32-bit 3D graphics engine based on Intel Graphics Media Accelerator 950 (Intel GMA 950) architecture. -
Page 16: Ethernet
Table 1.3: SODIMM Types (Non-ECC) Transcend 256 MB DDR2 667 TS32MSQ64V6M Infineon HYB18T512161BF-28 (RoHS) (32x16) 512 MB DDR2 667 TS64MSQ64V6J SAMSUNG K4T51083QC ZCE6 (64x8) 2 GB DDR2 667 TS256MSQ64V6U Micron 7GEIID9HNL 1 GB DDR2 667 TS128MSQ64V6J SAMSUNG K4T51083QC ZCE6 (64x8) Apacer 512 MB DDR2 667 78.92G63.422... -
Page 17: Leds
1.2.11 LEDs LEDs are provided on the front panel as follows: One bi-color LED (blue/yellow) indicates hot-swap status. Blue indicates that the board may be safely removed from the system and yellow indicates HDD activ- ity. One green LED provides power status and a further green LED indicates “Mas- ter or Drone”... -
Page 18: Compactpci Bridge
1.2.16 CompactPCI Bridge The MIC-3392 uses a PLX PCI-6254 (Hint HB6) universal bridge as a gateway to an intelligent subsystem. When configured as a system controller, the bridge acts as a standard transparent PCI-to-PCI bridge. As a peripheral controller it allows the local MIC-3392 processor to configure and control the onboard local subsystem indepen- dently from the CompactPCI bus host processor. -
Page 19: Pmc (Pci Mezzanine Card) Ieee1386.1 Compliant
1.2.18 PMC (PCI Mezzanine Card) IEEE1386.1 Compliant Additional I/O or co-processing functionality is supported by add-on PMC modules. The MIC-3392 supports up to two PMC sites that are fully compliant with the IEEE1386.1 PCI Mezzanine Card specification. PMC1 supports a 64-bit / 66 MHz PCI bus interface whilst PMC2 supports a 32-bit / 33 MHz PCI bus interface. -
Page 20: Functional Block Diagram
Functional Block Diagram Figure 1.1 MIC-3392 functional block diagram MIC-3392 User Manual Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... -
Page 21: Jumpers And Switches
Jumpers and Switches Tables 1.4 and 1.5 list the jumper and switch functions. Figure 1.2 illustrates the jumper and switch locations. Read this section carefully before changing the jumper and switch settings on your MIC-3392 board. Table 1.4: MIC-3392 jumper descriptions Number Function Clear CMOS... -
Page 22: Clear Cmos (Jp1)
SW5-1 selects the LAN port that is used for Serial Over LAN (SoL) functionality. The 10/100 LAN3 port is routed to the rear I/O but is not currently implemented on stan- dard Advantech Rear I/O modules. Table 1.11: SW5-2 SATA HDD channel setting (single PMC) - Page 23 Table 1.13: SW5-3 & SW5-4: BMC, SIO & RTM COM2 selections SW5-3 SW-5-4 BMC to RTM (Default) SIO to RTM SIO to BMC When COM2 is not used as a console interface, it is used to communicate BMC infor- mation via the onboard SIO COM2 or RTM COM2. SW5-3 and SW5-4 determine whether COM2 is routed via SIO COM2 or RTM COM2.
-
Page 24: Connector Definitions
Table 1.16: SW1: BMC Reset Button & Platform Reset Button SW1-1 BMC Reset SW1-2 Reset (Platform Reset) Figure 1.2 MIC-3392 jumper, switch and connector locations Connector Definitions Onboard connectors link to external devices such as hard disk drives, keyboards or floppy drives. -
Page 25: Vga Display Connector (Vcn1 Or Rear I/O)
Table 1.17: MIC-3392 connector descriptions LAN2 Connector J1/J2 Primary CompactPCI bus J3/J5 Rear I/O transition DDR2 Channel B SODIMM socket 1.5.1 VGA Display Connector (VCN1 or rear I/O) The MIC-3392 incorporates the Intel 945GM/GME Graphic Memory Controller Hub (GMCH). The Intel Graphics Media Accelerator 950 (Intel GMA 950) graphics core is an intelligent and responsive graphics engine built into the chipset. -
Page 26: Sata Daughter Board Connector (Cn4) (Single Pmc Only)
1.5.5 SATA daughter board connector (CN4) (Single PMC only) The MIC-3392 provides two SATA interfaces: SATA1 channel via CN4 connects to the onboard SATA HDD or via the J3 connector to a rear I/O board when selected by switch SW5-2. 1.5.6 Ethernet Configuration (RJ1/RJ2 or Rear I/O RJ1) The MIC-3392 is equipped with two high performance, PCI-Express based, network... -
Page 27: Installing The Cpu And Heatsink
CPU. The heat pad is fragile, so please be careful during disassem- bly. If you are using a heat pad other than the one issued by Advantech, be aware that it may not absorb a sufficient amount of heat. -
Page 28: Cpu & Heatsink Installation Steps
1.7.1 CPU & Heatsink Installation Steps The MIC-3392 contains electrostatically sensitive devices. Please discharge your clothing before touching the assembly. Do not touch components or connector pins. We recommend that you perform assembly at an anti-static workbench. Check that the following components are close at hand: –... -
Page 29: Battery Replacement
Battery Replacement The battery model number is CR2032M1S8-LF, a 3 V, 210 mAH battery. Replace- ment batteries may be purchased from Advantech and replaced as described in the instructions below. Order the battery from Advantech using the following part number:... -
Page 30: Software Support
Software Support Windows XP, Windows 2003, Windows Vista and Fedora Linux 6 have been fully tested on the MIC-3392. Please contact your local sales representative for details on support for other operating systems. MIC-3392 User Manual Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... - Page 31 MIC-3392 User Manual Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
-
Page 32: Chapter 2 Ami Bios Setup
Chapter AMI BIOS Setup This chapter describes how to configure the AMI BIOS. Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... -
Page 33: Introduction
Introduction The AMI BIOS has been customized and integrated into many industrial and embed- ded motherboards for over a decade. This section describes the BIOS which has been specifically adapted to the MIC-3392. With the AMI BIOS Setup program, you can modify BIOS settings and control the special features of the MIC-3392. -
Page 34: Entering Setup
BIOS supports your CPU. If there is no number assigned to the patch code, please contact an Advantech application engineer to obtain an up-to-date patch code file. This will ensure that your CPU's system status is valid. -
Page 35: Main Setup
Main Setup When you first enter the BIOS Setup Utility, you will enter the Main setup screen. You can always return to the Main setup screen by selecting the Main tab. Two primary setup options are described in this section. The main BIOS setup screen is shown below. -
Page 36: Advanced Bios Features Setup
Advanced BIOS Features Setup Select the Advanced tab from the MIC-3392 setup screen to enter the Advanced BIOS Setup screen. Select any of the items in the left frame of the screen, such as CPU Configuration, to go to the sub menu for that item. You can display an Advanced BIOS Setup option by highlighting it using the <Arrow>... -
Page 37: Cpu Configuration
2.4.1 CPU Configuration Figure 2.5 CPU Configuration 2.4.1.1 Max CPUID Value Limit It is recommended that you leave this value at the default setting of Disabled. Please note that this BIOS feature currently only allows the Intel Pentium 4 processor with Hyper-Threading Technology to work with operating systems that do not support extra CPUID information provided by the processor. -
Page 38: Lan & Smbus Configuration
This setting indicates whether remote management is performed by Advantech's MIC-3924A Chassis Management Module (CMM) or by an IPMI-enabled CMM such as the Advantech MIC-3927. The default setting is “BMC” which corresponds to IPMI- enabled CMM. Table 2.1: Select SMBus mode... -
Page 39: Ide Configuration
2.4.3 IDE Configuration Figure 2.7 IDE Configuration 2.4.3.1 ATA/IDE Configuration Three options are available: Disabled, Compatible, or Enhanced. “Disabled” means that all IDE resources are disabled. “Compatible” enables up to 2 IDE channels for OS's requiring legacy IDE operation (default setting), and “Enhanced” enables all SATA and PATA resources. -
Page 40: Floppy Configuration
2.4.4 Floppy Configuration Figure 2.8 Floppy Configuration Floppy A: Select the type of floppy drive connected to the system. Floppy B: Select the type of floppy drive connected to the system. MIC-3392 User Manual Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... -
Page 41: Super I/O Configuration
2.4.5 Super I/O Configuration Figure 2.9 Super I/O Configuration Onboard Floppy Controller: Used to enable or disable the floppy controller Serial Port1 Address: Used to select Serial Port1 base addresses Serial Port2 Address: Used to select Serial Port2 base addresses Parallel Port Address: Used to select Parallel Port base addresses –... -
Page 42: Acpi Setting
2.4.6 ACPI Setting Figure 2.10 ACPI Setting The options for “ACPI Aware O/S” are “Yes” or “No” in order to enable or disable ACPI support for the operating system. The default is “Yes”. 2.4.7 Hardware Health Configuration Figure 2.11 Hardware Health Configuration MIC-3392 User Manual Artisan Technology Group - Quality Instrumentation ... -
Page 43: Console Redirection Configuration
2.4.8 Console Redirection Configuration Figure 2.12 Configure Remote Access types and parameters 2.4.8.1 Remote Access You can disable or enable the BIOS remote access feature here. The Optimal and Fail-Safe default setting is “Enabled”. 2.4.8.2 Serial Port Number Select the serial port you want to use for console redirection. You can set the value for this option to either ICH COM1 or ICH COM2. -
Page 44: Pci/Pnp Setup
PCI/PNP Setup Select the PCI/PnP tab from the MIC-3392 setup screen to enter the Plug and Play BIOS Setup screen. You can display a Plug and Play BIOS Setup option by highlight- ing it using the <Arrow> keys. All Plug and Play BIOS Setup options are described in this section. -
Page 45: Boot Setup
Boot Setup Figure 2.14 Boot Setup 2.6.1 Boot Settings Configuration Figure 2.15 Boot Settings Configuration MIC-3392 User Manual Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... -
Page 46: Security Setup
Quick Boot: Allows the BIOS to skip certain tests while booting. This will decrease the time needed to boot the system. Wait For 'F1' If Error: Wait for the F1 key to be pressed if an error occurs. Hit 'DEL' Message Display: Displays “Press DEL to run Setup” in POST. Security Setup Figure 2.16 Password Configuration Select Security Setup from the MIC-3392 Setup main BIOS setup menu. -
Page 47: Advanced Chipset Settings
Advanced Chipset Settings Figure 2.17 Advanced Chipset Setting 2.8.1 North Bridge Chipset Configuration Figure 2.18 North Bridge Configuration MIC-3392 User Manual Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... -
Page 48: South Bridge Configuration
DRAM Frequency: Auto, 533MHz, 667MHz Boots Graphic Adapter Priority: Select which graphics controller to use as the primary boot device. 2.8.2 South Bridge Configuration Figure 2.19 South Bridge Configuration USB 2.0 Controller: Enabled, Disabled Audio Controller: Auto, Azalia, AC'97 Audio and Modem, All Disabled MIC-3392 User Manual Artisan Technology Group - Quality Instrumentation ... -
Page 49: Exit Option
Exit Option Figure 2.20 Exit Option 2.9.1 Save Changes and Exit When you have completed the system configuration changes, follow these steps: Select Exit Saving Changes from the Exit menu and press <Enter>. The follow- ing messages appear on the screen: Save Configuration Changes and Exit Now? [Ok] [Cancel] Select Ok to save changes and exit. -
Page 50: Chapter 3 Ipmi
Chapter IPMI This chapter describes IPMI configuration. Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... -
Page 51: Introduction
Introduction The MIC-3392 fully supports the IPMI 2.0 interface and the PICMG 2.9 R1.0 specifi- cation. The Renesas H8S/2167 has been implemented as the IPMI controller / Base- board Management Controller (BMC) to run firmware and collect information. The MIC-3392 IPMI firmware is sourced from Avocent, a provider of proven and tested IPMI implementations in a wide range of mission-critical applications. -
Page 52: Ipmi Device Global Commands
3.3.1 IPMI Device Global Commands Table 3.1: Supported IPMI commands IPMI Device Global Commands NetFn Mandatory / Optional Get Device Id 0x01 Cold Reset 0x02 Get Self Test Results 0x04 Manufacturing Test On 0x05 Set ACPI Power State 0x06 Get ACPI Power State 0x07 Get Device GUID 0x08... -
Page 53: Bmc Watchdog Timer Commands
Table 3.4: BMC Device and Messaging Commands BMC Device and Messaging Commands NetFn Mandatory / Optional Set BMC Global Enables 0x2e Get BMC Global Enables 0x2f Clear Message Flags 0x30 Get Message Flags 0x31 Enable Message Channel Receive 0x32 Get Message 0x33 Send Message 0x34... -
Page 54: Chassis Device Commands
3.3.4 Chassis Device Commands Table 3.6: Chassis Device commands Chassis Device Commands NetFn Mandatory / Optional Get Chassis Capabilities Chassis 0x00 Get Chassis Status Chassis 0x01 Chassis Control Chassis 0x02 Chassis Identify Chassis 0x04 Set Chassis Capabilities Chassis 0x05 Get System Restart Cause Chassis 0x07 Set System Boot Options... -
Page 55: Sel Device Commands
3.3.7 SEL Device Commands Table 3.9: SEL Device commands SEL Device Commands NetFn Mandatory / Optional Get SEL Info Storage 0x40 Reserve SEL Storage 0x42 Get SEL Entry Storage 0x43 Add SEL Entry Storage 0x44 Clear SEL Storage 0x47 Get SEL Time Storage 0x48 Set SEL Time... -
Page 56: Sensors And Threshold Configuration
3.3.10 Sensors and Threshold configuration Sensor data record (SDR) repository will be stored in BMC's flash memory and can- not be changed. Note! UNC = Upper Non-Critical. UC = Upper Critical UNR = Upper Non-Recoverable LNC = Lower Non-Critical LC = Lower Critical LNR = Lower Non-Recoverable Table 3.12: Sensor List Sensor Name Sensor... -
Page 57: Serial Over Lan
Table 3.13: Threshold values of sensors Sensor Number Entity Instance Nominal Reading 3.3 V 2.5 V 12 V 1.5 V 35° C 55° C 3.62 V 2.76 V 5.6 V 13.4 V 1.65 V 45° C 2.96 V 2.24 V 4.4 V 10.6 V 1.2 V... -
Page 58: Bmc Reset
BMC Reset The BMC can initiate a graceful shutdown of the MIC-3392 by issuing a short pulse (~500 ms) on the power button signal to the ACPI controller when commanded through its host, OOB, or IPMB channels as well as from a Graceful Shutdown Event from the CMM or a Handle OPEN event. - Page 59 MIC-3392 User Manual Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
-
Page 60: Appendix A Pin Assignments
Appendix Pin Assignments This appendix describes pin assignments. Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... -
Page 61: J1 Connector
J1 Connector Table A.1: J1 CompactPCI I/O Row A Row B Row C Row D Row E Row F -12V TRST# (NC) +12V TCK (NC) TMS (NC) TDI (NC) INTA# INTB# INTC# INTD# IPMB_PWR HEALTHY# V(I/O) INTP INTS PCI_RST# GNT0# REQ0# PCI_PRESENT +3.3V... -
Page 62: J2 Connector
J2 Connector Table A.2: J2 CompactPCI I/O Row A Row B Row C Row D Row E Row F CLK1 REQ1# GNT1# REQ2# CLK2 CLK3 SYSEN# GNT2# REQ3# CLK4 GNT3# REQ4# GNT4# V(I/O) C/BE7# C/BE6# C/BE5# V(I/O) C/BE4# PAR64 AD63 AD62 AD61 AD60... -
Page 63: J3 Connector
J3 Connector Table A.3: J3 CompactPCI I/O (LPT, FDD, Parallel IDE, 2.16) Row A Row B Row C Row D Row E Row F 1 LPT_PD0 LPT_PD1 LPT_PD2 LPT_PD3 LPT_PD4 2 LPT_PD5 LPT_PD6 LPT_PD7 LPT_BUSY FDD_DRVEN1 3 LPT_STB# LPT_AFD# FDD_DRVEN0 FDD_INDEX# FDD_DSKCHG# GND 4 LPT_ERR# LPT_ACK# FDD_RDATA# FDD_WP#... -
Page 64: J5 Connector
J5 Connector Table A.4: J5 CompactPCI I/O (VGA, LAN, COM, USB, PS/2) Row A Row B Row C Row D Row E Row F GbE1_MD0+ GbE1_MD0- GND GbE1_MD1+ GbE1_MD1- GbE1_MD2+ GbE1_MD2- GND GbE1_MD3+ GbE1_MD3- GbE2_MD0+ GbE2_MD0- GND GbE2_MD1+ GbE2_MD1- GbE2_MD2+ GbE2_MD2- GND GbE2_MD3+ GbE2_MD3- +3.3V... - Page 65 Table A.6: CN9 COM1 (RJ45) Connector DCD# DSR# RTS# SOUT CTS# DTR# Table A.7: CN4 & CN5 USB port 1 & port 2 +5V (fused) +5V (fused) USBD0- USBD1- USBD0+ USBD1+ Table A.8: BT1 CMOS battery BAT_VCC Table A.9: CN10 CF socket CS1# +5V (?) CS3#...
- Page 66 Table A.10: CN4 SATA daughter board connector SATA_TX0P SATA_TX0N SATA_RX0N SATA_RX0P RSV (+3.3V/+12V) RSV (+3.3V/+12V) RSV (+3.3V/+12V) Table A.11: RJ1 LAN1 Connector LANMDI_0+ LANMDI_2- LANMDI_0- LANMDI_1- LANMDI_1+ LANMDI_3+ LANMDI_2+ LANMDI_3- Table A.12: RJ1 LAN1 Indicator MIC-3392 User Manual Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
-
Page 67: M/D, Pwr & Ide/Hot-Swap Leds
A.5.1 M/D, PWR & IDE/Hot-swap LEDs Name Description M/D (Green) Indicates Master or Drone mode status PWR (Green) Indicates the power status IDE / Hot-swap (Yellow/Blue) Indicates IDE activity when yellow, or that the board is ready to be hot-swapped when blue. MIC-3392 User Manual Artisan Technology Group - Quality Instrumentation ... -
Page 68: Appendix B Programming The Watchdog Timer
Appendix Programming the Watchdog Timer This appendix describes how to program the watchdog timer. Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... -
Page 69: Watchdog Timer Programming Procedure
Watchdog Timer Programming Procedure To program the watchdog timer, you must execute a program that writes a value to I/ O port address 443/444 (hex) for Enable/Disable. This output value represents time interval. The value range is from 01 (hex) to FF (hex), and the related time interval is 1 to 255 seconds. -
Page 70: Cpld
Appendix CPLD This appendix describes CPLD configuration. Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... -
Page 71: Features
Debug Message: Boot time POST message CPLD I/O Registers The Advantech MIC-3392 CPLD communicates with four main I/O spaces. The LPC (low pin count) Unit is used to interconnect the Intel ICH7M LPC signals. The Debug Port Unit is used to decode POST codes. The Hot-Swap Out-Of-Service LED Control Unit is used to control the blue LED during Hot-Insert and Hot-Remove. -
Page 72: Watchdog Disable Register
C.2.3 Watchdog Disable Register Table C.4: Watchdog [7:0] (LPC I/O address: 444H) Bits Name Default Valid Read Only Function State State 7 ~ 0 Watchdog xxh Reading I/O port 444h will disable the watchdog. The return value is meaningless. Table C.5: Version [7:0] (LPC I/O address: 445H) Bits Name Default... - Page 73 All brand and product names are trademarks or registered trademarks of their respective companies. © Advantech Co., Ltd. 2009 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
Need help?
Do you have a question about the MIC-3392A-M1E and is the answer not in the manual?
Questions and answers