Martin Easypix User Manual page 36

• The Easypix main software update file, downloadable free of charge
from the "After-Sales" area of the Martin website (this file can be
downloaded automatically from within the Martin Uploader application)
• A Martin Universal USB-DMX Interface or similar PC/luminaire
hardware interface and a Windows PC.
Installing software
To install software in the Easypix Power:
1.
2.
3.
4.
36
Connect the uploader hardware to the Easypix Power data input
connector.
Upload the software as described in the Martin Uploader help file
or user documentation. The red "Service" LED will flash during
the upload.
When the upload is completed, the red "Service" LED will
extinguish. Disconnect the uploader hardware and reconnect the
Easypix Power to the DMX link.
Software uploads can fail (most failures are caused by
interference on the data link). Cycle power off and on and check
that the Easypix Power resets correctly, i.e. no LED error warning
appears. If an error appears, cycle power off and on again and
check that the luminaire now resets correctly. If an error appears
again, repeat the upload procedure. If the problem persists,
contact the Martin Service organization or its authorized agents
for assistance.
Easypix user manual