Installing the Honeywell IP Utility and Web-Client Software
About the Honeywell IP Utility and Web-Client
About the Honeywell IP Utility
About the Web-Client
Administrator and Guest User Profiles
32
The Honeywell IP Utility is a software application that is installed from a CD or downloaded
from the Honeywell Systems Group website (www.honeywellvideo.com). It is installed on a
local workstation and is primarily used by Administrators to configure the EQUIP Series of
products residing on an IP network.
The IP Utility enables users to:
•
Discover device(s) on a network
•
Configure the IP network settings, name device(s), upgrade firmware, change
passwords
•
Open individual Web-Client applications for each discovered device.
The Web-Client is the web-based application that enables users to:
•
View live streaming video
•
View the device network settings and firmware details
•
Configure and run mimic or preset tours (when applicable)
•
Configure compression and video analytics settings
Both the Honeywell IP Utility and the Web-Client have two user types: Administrator and
Guest. However, the number of users that can log on at the same time differs.
IP Utility
Only one Administrator and up to four Guests can be logged on at a time.
Web-Client
Up to six Web-Client users can be connected at the same time in any combination of
Administrator and Guest users that totals six. For example, six Administrators can log on at
the same time, or six Guests, or three Administrators and three Guests, or two
Administrators and four Guests.