Operation; General; Temperature Control - Perlick 15" Signature series Installation & Operation Manual
Refrigerator refrigerated drawers beer dispenser beverage center wine reserve
Hide thumbs
Also See for 15" Signature series:
- Product manual (28 pages) ,
- Operation manual (18 pages) ,
- Operation & installation manual (16 pages)
Table of Contents
Advertisement
figure 9. WOODeN WINe
RaCk tRIM DesIgN
WOODEN WINE RACK TRIM FINISHING (optional)
all wine racks come with a sleek stainless steel front.
unfinished solid hardwood front are optional and
can be removed and replaced with other wood to
match your cabinetry. see design figure 9 above for
wine rack face details.
the unfinished faces should be finished and sealed.
In many cases stains and/or finishes have odors that
may be objectionable in an enclosed area. to remove
the front wood-face from the wine shelf, simply pull
out the wine shelf and remove the fasteners, finish as
desired and re-install with fasteners.
OPERATION
the unit is equipped with a state-of-the-art refrig-
eration system. the variable speed compressor
automatically changes speeds based on system
conditions and load. the cabinet is equipped with
an adjustable digital temperature controller and leD
display. the unit is a frost-free model. the evaporator
coil automatically defrosts on demand at predeter-
mined intervals.
© 2011 15" Cabinet Installation / Operation Manual
Interior light
the unit is equipped with an interior light that is
illuminated when the door is opened. the cabinet
also comes standard with a manual light switch
located next to the light for displaying your products
through a glass door. always ensure that the manual
switch is in the off position before closing a solid
wood or stainless steel door. If manual light switch
is left on for an extended period of time it may in-
crease the cabinet temperature, especially at the top
and cause the refrigeration system to run longer.
Loading Product
IMPORTANT NOTE: Before storing perishables,
allow unit to run for a minimum of 24 hours to al-
low temperature stabilization after start-up.
When loading items into unit, do no block internal
louvers and fan guard openings or performance will
be decreased.
Temperature Control Panel
the controller is located on the top front face of the
cabinet and is equipped with a tinted see-through
lens which opens by pulling out on the bottom of
the lens and lifting up.
Document No. Z2305
19
Advertisement
Table of Contents
