Advertisement
PERLICK RESIDENTIAL INSTALLATION MANUAL
SAFETY
PLEASE READ all instructions completely before attempting
to install or operate the unit. Take particular note of the
DANGER, WARNING and CAUTION information in the
manual. The information is important for the safe and
efficient installation, operation and care of your Perlick unit.
DANGER
Indicates a hazard that WILL result in serious injury or
death if precautions are not followed.
WARNING
Indicates a hazard MAY cause serious injury or death if
precautions are not followed.
CAUTION
Indicates a hazard where minor injury or product
damage may occur if precautions are not followed.
OPERATION
MASTER SWITCH
Signature Series products come equipped with a master
power switch located behind the louvered toe kick.
Remove the toe kick to turn power on or off to the unit.
INTERIOR LIGHT
Door units are equipped with an interior light that
illuminate when the door is opened. All HPA24 and
HHA24 models come standard with adjustable blue and
white LED lighting. The cabinet also comes equipped with
a manual light switch for displaying the products through
a glass door.
Always ensure that the manual light switch is in the OFF
position before closing a solid wood or stainless steel
door. If manual light switch is left on for an extended
period of time, it may increase the cabinet temperature,
and cause the refrigeration system to run harder.
4
perlick.com
LOADING PRODUCT
Before storing perishables, turn unit on and allow it to
operate for a minimum of 24 hours to allow temperatures
to stabilize.
When loading items into the unit, do not block internal
louvers and fan guard openings or performance will be
decreased.
CHECKING PRODUCT TEMPERATURE
1). To accurately check the temperature of product stored
in the refrigerated compartment, insert an accurate
thermometer into a plastic unbreakable bottle, partially
filled with water. Tighten bottle cap securely.
2). Place the bottle in the desired area for 24 hours. Refrain
from opening the unit during the testing period. After
24 hours, check the temperature of the water. Adjust the
temperature accordingly using the following procedures:
DIGITAL TEMPERATURE CONTROL
Figure 1. Digital Temperature Controller
Perlick Signature Series and Signature Sottile units
come standard with state-of-the-art digital control. The
following information is instructions on how to use the
controller.
Programming Button Definitions:
SET button
DEFROST button (melting snowflake)
UP arrow
DOWN arrow
ON/OFF button
Advertisement
