Door Reversing Instructions - Perlick 15" Signature series Installation & Operation Manual

Refrigerator refrigerated drawers beer dispenser beverage center wine reserve

Hide thumbs Also See for 15" Signature series:

Product manual (28 pages)

Operation manual (18 pages)

Operation & installation manual (16 pages)

Table Of Contents

Table of Contents

PROCEDURE FOR SWITCHING DIRECTION OF DOOR SWING

ON PERLICK C-SERIES, 15 INCH, AND SIGNATURE SERIES CABINETS

NOTE: Changing the door mount is not advisable if you have a door with custom wood overlay.

doing so may result in having a handle that is in an undesirable position.

Required:

-Large Flat-Head Screwdriver

-Regular Phillips-Head Screwdriver

-Hinge Kit from Perlick

-Plastic Putty Knife

SUPPORT

Step 2: Pull

door to the side,

then lower door.

Step 1: Support door in

the open position as shown.

Remove Hinge Pin.

THIS DOCUMENT/PUBLICATION/SOFTWARE/DRAWING CONTAINS PROPRIETARY INFORMATION WHICH IS THE PROPERTY OF THE PERLICK CORPORATION. IT MAY NOT BE REPRODUCED OR TRANSMITTED IN ANY FORM, ELECTRONIC

OR MECHANICAL, INCLUDING PHOTOCOPYING, RECORDING, OR USED IN ANYINFORMATION STORAGE, TRANSMISSION, OR RETRIEVAL SYSTEM, WITHOUT WRITTEN PERMISSION FROM THE PERLICK CORPORATION

Step 3: Remove

Top and Bottom

Hinge Brackets

and save the

screws for later.

Step 4: Remove the Hole Plugs

from the Top and Bottom Hinge

Bracket mounting holes. Then

place them in the holes on the

opposite side made vacant

in Step 3.

Step 5: Using the