Panasonic WJ-HD220 Operating Instructions Manual page 98

5. Select YES or NO rotating the JogDial, and press the
JogDial.
YES: Carries out formatting. Wait until the process
ends.
When YES is selected, the display will turn to NOW
FORMATTING. It will change to HDD FORMAT → SET
DONE when formatting is completed.
NOW FORMATTING
HDD FORMAT SET DONE!
When the [STOP] button is pressed, the window returns
to that of step 1.
Select RESTART to return to normal operation.
8 Restarting (RESTART)
This command closes the DISK MENU, and returns to
normal operation.
1. Display the DISK MENU.
NO.1:XXX.XXGB
NO.2:XXX.XXGB
REMOVE LINK SET→
HDD FORMAT
RESTART
2. Move the cursor to RESTART.
RESTART
3. Press the JogDial.
RESTART
4. Rotate the JogDial to select a restarting parameter.
YES: Escapes from the DISK MENU, and enters normal
operation.
PLAY ONLY: Enters a special mode that prohibits
recording, but allows playback.
98
DISK MENU
SET→
SET→
SET→
NO
Notes:
• The PLAY ONLY mode can be utilized when you
verify a transplanted HDD removed from another
disk recorder that malfunctioned.
• In normal operation after selecting the PLAY ONLY
mode, "STOP (PO)" appears in the status display
while camera pictures are displayed, but not in
playback. "PO" stands for PLAY ONLY.
5. Press the JogDial to execute the selection, or press the
[STOP] button to return to the above step 1.
A message "SET DONE!" appears, and the recorder
restarts.
RESTART
Notes:
• Follow the procedures described above when the DISK
MENU appears again after restarting. This happens
when the settings have been changed.
• To cancel the PLAY ONLY mode, follow these proce-
dures described above and select YES for RESTART.
SET DONE