Setup Procedures; I Prior To Setup - Panasonic WJ-HD220 Operating Instructions Manual

SETUP PROCEDURES

I Prior to Setup

G Turning On the Power
1. Plug the power cord into the AC outlet.
2. Turn on the power switch on the rear panel. The oper-
ate LED lights up. An HDD check and a system check
will be carried out while displaying respective mes-
sages.
Power-on recording will start if TIMER has been set to
EXT in the SYSTEM SETUP menu.
3. Press the [REC STOP] button to stop power-on record-
ing, if applicable.
POWER
ON
SIGNAL GND
OFF
4. Hold down the buttons of [LOCK] and [RESET] simulta-
neously to suspend alarm inputs. The SUSPEND indica-
tor will light up. This will prevent your setting operations
from being interrupted by alarm inputs.
OPERATE
Note: Refer to Power-on Procedures in the Appendix
for details.
ALARM
SUSPEND
OPERATE
RESET
SP
ALARM TIMER DST
MU
SUSPEND REMOTE
RESET LOCK OSD SEQUE
G Turning Off the Power
1. Press the [STOP] button when playing back, or [REC
STOP] button when recording. Confirm that the HDD
access indicator has turned off.
2. Turn off the power switch on the rear panel. The oper-
ate LED goes off.
HDD STOP PLAY REC
SETUP
/ESC
FULL
ALARM
SERCH
ERROR
PLAY MODE SELECT
Confirm that
HDD STOP
the HDD access
SETUP
/ESC
indicator is off.
FULL
ALARM
SERCH
ERROR
Notes:
• Do not turn off the power while the HDD access
indicator is on.
• Do not leave the recorder turned off for a long time.
Supply AC power to the unit and turn it on to charge
up the backup battery.
PUSH— PAUSE SET
REC STOP
TIME&DATE
SEARCH
ALARM
RECALL
Digital Disk Recorder WJ-HD220
PLAY REC REC STOP
TIME&DATE
SEARCH
AL
RE
PLAY MODE SELECT
POWER
ON
SIGNAL GND
OFF
21