I Switcher Setup (Switcher Setup) - Panasonic WJ-HD220 Operating Instructions Manual
Digital disk recorder
Hide thumbs
Also See for WJ-HD220:
- Operating instructions manual (103 pages) ,
- Specifications (3 pages) ,
- Brochure & specs (3 pages)
Table of Contents
Advertisement
I Switcher Setup (SWITCHER
SETUP)
This window specifies sequence setups only for the WJ-
HD220. The browser's sequence is set up in LIVE
SEQUENCE SETUP on page 77.
8 Common Setup (COMMON SETUP)
Multiscreen monitor Start Display (START DISPLAY
(MULTI))
Spot monitor Start Display (START DISPLAY
(SPOT))
The image in the selected form will be displayed on the
multiscreen monitor and spot monitor when the unit is
turned on.
Single image: CH 1 – CH 8*
Quad image: QUAD-4A (including 1-4), QUAD-4B
(including 5-8)
Multi image: 9-SCREEN (including 1-8)
Sequence: SPOT SEQUENCE*, MULTI SEQUENCE
Note: The spot monitor can display only a single image
or spot sequence while the multiscreen monitor can
display any of the forms listed above.
Multiscreen Selection Mode (MULTI SELECT MODE)
When the [MULTISCREEN SELECT] button on the front
panel is pressed, the monitor display will be switched
as follows depending on the setup.
QUAD ONLY: QUAD-4A → QUAD-4B → QUAD-4A
ALL: QUAD-4A → QUAD-4B → 9-SCREEN →
QUAD-4A
8 Multiscreen Sequence Setup
(MULTI SEQUENCE SETUP)
Sequence Timing (SEQUENCE TIMING)
INT: The time preset on the internal timer allows the
sequence to move a step forward.
EXT: The SEQ IN signal on the rear panel allows
the sequence to move a step forward.
Auto Skip (AUTO SKIP)
ON: The sequence skips any step where no video
is input.
OFF: The sequence does not skip the step.
Click the button to open the Multi Sequence Setup window.
8 Spot-screen Sequence Setup
(SPOT SEQUENCE SETUP)
Sequence Timing (SEQUENCE TIMING)
INT: The time preset on the internal timer allows the
sequence to move a step forward.
EXT: SEQ IN signal to the rear panel allows the
sequence to step forward.
Auto Skip (AUTO SKIP)
ON: The sequence skips any step where no video
is input.
OFF: The sequence does not skip the step.
Click the button to open the Spot Sequence Setup window.
8 Camera View Setup (CAMERA VIEW SETUP)
Secret View (SECRET VIEW)
ON: The spot monitor screen will be blacked out
when the multiscreen monitor displays images
in the single live mode.
OFF: The spot monitor continues to display images
regardless of the multiscreen monitor status.
Click the button to open the Camera View Setup window.
Note: The secret view function will be useful to watch
shoplifters without being recognized in a store
where, for example, cameras and spot monitors are
installed on the sales floors and a multiscreen moni-
tor is installed in a control room. The spot monitor
will black out its screen when the multi-screen moni-
tor is switched to the single live mode to focus on
the potential shoplifter.
Page 70
- Quick Links:
- Playback
Hide quick links:
Advertisement
Table of Contents
