Panasonic WJ-HD220 Operating Instructions Manual page 65

Note: The recording rate may be sacrificed in the fol-
lowing cases.
• Recording and playback/FTP access are carried
out simultaneously.
• A multi-split screen is displayed.
• VMD (video motion detection) is enabled.
• A PC accesses the live images via the network.
8 Alteration Detection (ALTER DETECT)
You can enable or disable the addition of alteration-
detection signals in the JPEG data supplied to the net-
work. The default is OFF.
ON: Detects alterations.
OFF: Does not detect.
Note: When set to ON, the data transmission rate on
the network will slow down.
8 Disk End Mode (DISK END MODE)
STOP: Stops recording until a mode other than [STOP]
is selected.
CONTINUE: Old data is automatically overwritten from
the disk start.
8 Disk End Buzzer (DISK END BUZZER)
ON: Enables the buzzer beep at the disk end (remain-
ing space = 0 %).
OFF: Disables the buzzer beep.
8 Play Priority (PLAY PRIORITY)
This setting places priority on a specific access point
for playing back the image data when access collisions
take place.
LOCAL: Places priority on front panel operations.
NET PLAY: Places priority on network access.
FTP GET: Places priority on access to the FTP.
NONE: The latest operation has priority over others.
8 Time Adjusting (TIME ADJUSTING)
The internal timer built into the WJ-HD220 is calibrated
once a day via the Time Adjust In and Out terminals on
the rear panel.
SLAVE: Accepts the calibration signal from the master.
MASTER: Supplies the calibration signal to the slave
units at the specified hour every day.
65