I Time & Date Search Playback; I Multiscreen Playback - Panasonic WJ-HD220 Operating Instructions Manual

Digital disk recorder
Hide thumbs Also See for WJ-HD220:
Table of Contents

Advertisement

4. Press the [PLAY] button to play back the searched
record.
5. Press the [STOP] button to stop playback.
Note: "Alarm Search Playback" and "Alarm Log Recall"
are similar, but different in operations. Refer to
I Alarm Log Recall & Search on page 49.
I Time & Date Search Playback
A picture record of a specified time and date is played
back.
5
PUSH— PAUSE
SET
PLAY
REC
REC STOP
TIME&DATE
SEARCH
ALARM
RECALL
1
3
2
JAN31.04
23:00:00
TO SEARCH PUSH PLAY KEY
1. Press the [TIME&DATE SEARCH] button. The monitor
displays the time & date search window.
2. Press the [D] or [C] button to move the cursor to the
next position.
3. Rotate the JogDial clockwise to increase the parameter
or counter-clockwise to decrease it.
4. Repeat steps 2 and 3 above until the desired parame-
ters are selected.
5. Press the [PLAY] button to start playback. The monitor
displays the single spot image when an input is select-
ed or the nine-split image when all input is specified.
The recorder stops searching when the playback
reaches the end of the record.
6. Repeat from step 1 to search for another time and date
or press the [TIME&DATE SEARCH] button to cancel
the function. Pressing the [STOP] button will also end
the searching.
Note: Searching may take the recorder 18 seconds at
worst

I Multiscreen Playback

You can view a multiple playback image displayed in 4-split
or 9-split pattern on the monitor at a time.
HDD
STOP
PLAY
REC
SETUP
/ESC
FULL
MULTI SCREEN
ALARM
SELECT
SERCH
ERROR
ZOOM
PLAY MODE SELECT
• Normal Playback
Press the [PLAY] button to start normal playback. The
image data recorded on the disk are sequentially
played back, and the monitor displays images in the
single display mode or multiscreen display mode.
• Multiscreen Playback
Press the [MULTI SCREEN SELECT] button an appro-
priate number of times. The monitor display changes as
follows. The LEDs in the [MULTI SCREEN SELECT] but-
ton and respective input buttons will light up.
Single Image → Quad A (4A/comprising inputs 1, 2, 3,
and 4) → Quad B (4B/inputs 5, 6, 7, and 8) → Nine-spit
(inputs 1 - 8) → Quad A → Quad B → Nine-split
• Specific Input Playback
Press the respective input button. The images of the
selected input are played back continuously and dis-
played on the monitor.
• Stop Playback
Press the [STOP] button to stop playback.
Note: When the playback proceeds to where recording
is executed on the disk, the recorder will pause
playback and freeze the displayed image on the
monitor.
Page 53

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents