Turbo Charger System; Checking - Kubota D1503-M-DI Workshop Manual

03-M-DI Series, WSM

7. TURBO CHARGER SYSTEM

[1] CHECKING

Turbine Side
1. Check the exhaust port (3) and inlet port (2) side of the turbine
housing (1) to see if there is no exhaust gas leak.
2. If any gas leak is found, retighten the bolts and nuts or replace
the gasket with new one.
(1) Turbine Housing
(2) Inlet Port
Compressor Side
1. Check the inlet pipe 1 (1) of the compressor cover (2) to see if
there is no air leak.
2. Check for loose connections or cracks in the suction side of the
intake pipe.
3. If any air leak is found, change the clamp (3) and or inlet pipes.
(1) Inlet Pipe 1
(2) Compressor Cover
S-101
DIESEL ENGINE
(3) Exhaust Port
W1069824
(3) Clamp
W1069939
KiSC issued 10, 2009 A