Kubota D1503-M-DI Workshop Manual page 115

03-M-DI Series, WSM
Rear End Cover
1. Unscrew the three rear end cover screws and the B terminal nut,
and remove the rear end cover.
Brush Holder
1. Unscrew the two screws holding the brush holder (1), and
remove the brush holder (1).
(1) Brush Holder
IC Regulator
1. Unscrew the three screws holding the IC regulator (1), and
remove the IC regulator (1).
(1) IC Regulator
Rectifier
1. Remove the four screws holding the rectifier (1) and the stator
lead wires.
2. Remove the rectifier (1).
(1) Rectifier
Rear End Frame
1. Unscrew the two nuts and two screws holding the drive end
frame and the rear end frame (1).
2. Remove the rear end frame (1).
(1) Rear End Frame
S-94
DIESEL ENGINE
W1018982
W1019054
W1019123
W1019192
W1019274
KiSC issued 10, 2009 A