Every 1500 Service Hours; Checking Of Injector Tip; Checking Of Egr Cooler; Changing Of Oil Separator Element - Kubota D1803-CR-TIE4 Operator's Manual

26 REGULAR CHECKS AND MAINTENANCE WORK

EVERY 1500 SERVICE HOURS

BChecking of injector tip
Consult your local KUBOTA Dealer for this service.
BChecking of EGR cooler
Consult your local KUBOTA Dealer for this service.
BChanging of oil separator element
To avoid personal injury or death:
A Be sure to stop the engine before
changing the oil separator element.
1. Remove the cover and take out the oil separator
element and gasket. Then wipe oil and grease off the
zone in question.
2. Fit a new oil separator element and gasket into
position.
[D1803-CR-TIE4, V2403-CR-TIE4]
(1) Oil separator
[V2607-CR-TIE4, V3307-CR-TIE4]
(1) Oil separator
[V3800-TIE4]
(1) Oil separator
(1) Body
(2) Oil separator element
(3) Gasket
(4) Cover
BChecking of PCV valve (Positive
Crankcase Ventilation valve)
Consult your local KUBOTA Dealer for this service.

EVERY 3000 SERVICE HOURS

BChecking of turbo-charger
Consult your local KUBOTA Dealer for this service.
BChecking of EGR System
Consult your local KUBOTA Dealer for this service.