Kubota D1503-M-DI Workshop Manual page 116

03-M-DI Series, WSM
Rotor
1. Press out the rotor (1) from drive end frame (3).
IMPORTANT
• Take special care not to drop the rotor and damage the slip
ring or fan, etc..
(1) Rotor
(2) Block
Retainer Plate
1. Unscrew the four screws holding the retainer plate (1), and
remove the retainer plate (1).
(1) Retainer Plate
Bearing on Drive End Side
1. Press out the bearing from drive end frame (3) with a press and
jig (1).
(1) Jig
(2) Block
Bearing at Slip Ring Side
1. Lightly secure the rotor (1) with a vise to prevent damage, and
remove the bearing (2) with a puller (3).
(1) Rotor
(2) Bearing
S-95
DIESEL ENGINE
(3) Drive End Frame
W1019438
W1019542
(3) Drive End Frame
W1019611
(3) Puller
W1019701
KiSC issued 10, 2009 A