Kubota D1503-M-DI Workshop Manual page 108

03-M-DI Series, WSM
Injection Timing (Continued)
NOTE
• The sealant is applied to both sides of the soft metal gasket
shim. The liquid gasket is not required for assembling.
• Shims are available in thickness of 0.20 mm, 0.25 mm, 0.30
mm and 0.35 mm. Combine these shims for adjustments.
• Addition or reduction of shim (0.05 mm, 0.0020 in.) delays or
advances the injection timing by approx. 0.0087 rad (0.5 °).
• In disassembling and replacing, be sure to use the same
number of new gasket shims with the same thickness.
(1) 2-Holes: 0.20 mm (Shim)
(2) 1-hole: 0.25 mm (Shim)
S-87
DIESEL ENGINE
(3) Without hole: 0.30 mm (Shim)
(4) 3-Holes: 0.35 mm (Shim)
W1111075
KiSC issued 10, 2009 A