Tail/Brake Light; License Plate Light - Suzuki VS1400 Owner's Manual

CAUTION
Oil from your skin may damage the headlight
bulb or shorten its life.
Grasp the new bulb with a clean cloth.
TAIUBRAKE LIGHT
To replace the tail/brake light bulb follow the
procedure below:
{I ----- ­ "
1. Remove the two screws and the lens.
2. Push the bulb in, turn it to the left until
the engagement pins are disconnected
and remove the bUlb.
3. To fit the replacement bulb into position
push the bulb in firmly and turn it to the
right while pushing in.
LICENSE PLATE LIGHT
To replace the license plate light bulb follow
the procedure below:
2. Push the bulb in turning it to the left
until the engagement pins are discon­
nected and remove the bulb.
3. To fit the replacement bulb into position
push the bulb in firmly and turn it to the
right while pushing in.
CAUTION
Overtightening the screws may cause the lens
to crack.
Tighten the screws only until they are snug.
1. Remove the two screws and the cover.
6-53
6-52