Warning/Alarm Indications - Panasonic PV-GS250 Operating Instructions Manual

( ): Photoshot picture quality
0: Remaining number of photoshot
pictures (When the remaining
number of photoshot pictures
reaches 0, the red indication
flashes.)
: Slide show playback
PictBridge: PictBridge mode
100-0001: Folder/File display
No.00: File number
1: Number of DPOF Setting
: Lock setting
: [640 480] Image size
640
: [1280 960] Image size
1280
: [1600 1200] Image size
1600
: [2048 1512] Image size
2048
For images not recorded with this Camcorder,
the size display is determined as follows
according to the number of horizontal pixels.
: 2048 or more
QXGA
: 1600 or more, less than 2048
UXGA
: 1280 or more, less than 1600
SXGA
: 1024 or more, less than 1280
XGA
: 800 or more, less than 1024
SVGA
: 640 or more, less than 800
640
(The size is not displayed at
under 640 pixels.)
Others
-31-
-43-
-51-
-45-
-45-

Warning/alarm indications

If any one of the following indications lights up or
flashes, please check the Camcorder.
Confirmatory indications
: A cassette with the accidental erasure
prevention slider placed in the [SAVE]
position is inserted.
No cassette is inserted.
[--]/ :
The built-in battery is low.
: The warning/alarm indication appears when
you record yourself. Turn the LCD monitor
towards the viewfinder and check the
warning/alarm indication.
: No card is inserted.
REMOTE :
An incorrect remote control mode has been
selected.
-25-
END:
The tape came to the end during recording.
: The video heads are dirty.
Textual indications
DEW DETECT/
Condensation has occurred. Take out the
cassette and wait for a while. It takes some
time until the cassette holder opens, but this
is not a malfunction.
LOW BATTERY:
The battery is low. Recharge it.
NO TAPE :
No tape is inserted.
TAPE END:
The tape came to the end during recording.
CHECK REC TAB:
You are attempting to record pictures on a
tape with the accidental erasure prevention
slider placed in the [SAVE] position.
You are attempting audio dubbing or digital
dubbing on a tape with the accidental
erasure prevention slider placed in the
[SAVE] position.
CHECK REMOTE MODE:
An incorrect remote control mode has been
selected. This is only displayed at the first
operation of the remote control after
powering-on.
-25-
WRONG TAPE FORMAT:
You are attempting to play back a tape
section that has been recorded with a
different TV system. This cassette is
incompatible.
UNPLAYABLE CARD:
You are attempting to play back data not
compatible with this Camcorder.
-23-
-74-
EJECT TAPE:
-73-
-16-
-18-
LSQT0862
67