Edit Mode; Recording From A Tape Onto A Card; Copying Onto A Dvd Recorder Or A Vcr (Dubbing) - Panasonic PV-GS250 Operating Instructions Manual

Edit mode

Recording from a tape onto a card

Still pictures can be recorded on a memory card
from scenes that have already been recorded on
a cassette.
Set to Tape Playback Mode.
Insert a tape which already has recorded
contents and a card.
1
Start playback.
2
Pause at the scene you wish to record, and
press the [PHOTO SHOT] button.
Audio will not be recorded.
The size of still pictures recorded on a card
becomes [640]. (This is not mega pixel
still-picture recording.)
If you press the [PHOTO SHOT] button without
pausing, blurred pictures may be recorded.
For pictures with an aspect ratio of 16:9,
"CHANGE ASPECT TO 4:3" is shown,
indicating that still pictures cannot be recorded.
DV input and wide images recorded on a tape
cannot be recorded on a card.
46
LSQT0862
Edit mode
PHOTO
SHOT
Copying onto a DVD recorder or a
VCR (Dubbing)
Pictures recorded by the Camcorder can be
stored on a DVD-RAM or other such media. Refer
to the instructions for the recorder.
Place a recorded cassette in the Camcorder,
and an unrecorded DVD-RAM or cassette in
the DVD recorder or VCR.
1
Connect the Camcorder and the recorder.
Connecting with the AV cable
AV/
S-VIDEO
Connect the Camcorder and the recorder by
using the AV cable
If the recorder has an S-Video terminal, then
also connect an S-Video cable
An S-video connection allows you to copy a
high quality image.
Connecting with the optional DV cable (Only
for equipment with a DV terminal)
DV
2
Turn on the Camcorder and set to Tape
Playback Mode.
3
Select the input channel on the TV set and
recorder.
4
Move the joystick up to select the [ ] icon
to start playback.
The image and sound are reproduced.
5
Start recording.
6
Move the joystick down to select the [ ]
icon to stop playback.
7
Stop recording.
[VIDEO IN]
[S-VIDEO IN]
[AUDIO IN]
.
(optional).