Playback Mode; Playing Back Tape - Panasonic PV-GS250 Operating Instructions Manual

Playback mode

Playing back tape

Set to Tape Playback Mode.
1
Operate with joystick.
/ : Playback/Pause
: Rewind/Review playback (Reverts to
playback with the
: Fast forward/Cue playback (Reverts to
playback with the
: Stop
During cue/review playback, fast-moving
images may show noise as a mosaic.
Before and after cue/review playback, the
screen may become blue for a moment or
images may be distorted.
Playback mode
/ icon.)
/ icon.)
To adjust volume
Adjust the speaker or headphone volume for
playback.
1
Move the [ /VOL ] lever to adjust the
volume.
W
Towards [ ]: increases the volume
Towards [ ]: decreases the volume
(The closer to [ ], the higher the volume.)
On the remote control, press the [T] button to
increase the volume or the [W] button to
decrease it.
When the adjustment is completed, the volume
indication will disappear.
If you do not hear the sound, check the settings
of [SETUP] >> [12bit AUDIO].
Repeat playback
When the tape end is reached, the tape will be
rewound and played back again.
1
Set [ADVANCE] >> [REPEAT PLAY] >> [ON].
The [ ] indication appears. (In order to
cancel the repeat playback mode, set
[REPEAT PLAY] >> [OFF] or set [OFF/ON]
switch to [OFF].)
When you set [USB FUNCTION] >>
[WEB CAM] and then connect the USB
connection cable, the repeat playback mode is
canceled.
Settings on the audio
If you cannot listen to the desired audio when
playing back a tape, check the settings in
[SETUP] >> [12bit AUDIO].
When you record or dub the audio in [12bit] and
set [SETUP] >> [12bit AUDIO] >> [MIX], the
audio will be played back in stereo sound
regardless of the settings in [AUDIO OUT].
VOL
T
41
LSQT0862